QINSUNring test helps you analyze the difference between the dust test chamber and the rain test chamber
The dust test chamber is actually simulating dust-proof test and wind sand test for the sample of the three climate environments. And the rain test chamber is just contrary to it. It is a tangent that creates in the box into a tested case to test the tested box. These two environmental test chambers are in military, aerospace, and industrial. Wide use, and many industries have put it as a major development project, the environmental test chamber is also recognized as the trend of future development.
Dust Test Chamber and rain test chamber, this cold is hot, a tide wet is dry, it seems that there is no difference between two test boxes, it is analog outdoor environment, but there is no split similarity. As two cases that appear early as the environmental test chamber ZUI. They have already played the height they can't be transcended by others.
The sand printed test chamber is generally less than 800L, because thiscaused by the principle of itself, according to the national standard GB / T4208-2008 shell protection level (IP code) The requirements of the bottom area of the dust box are 2 times the sample, the volume of the box is 4 times the volume of the sample; and the working box of the rain test chamber is much smaller. The dust test chamber is generally used in the industry, while the rain test chamber is very wide in military use. They also have a common point that they have the same time in failure, and the time to handle the fault is extremely rapid.The representative of the dust test chamber and the rain test chamber as an environmental test chamber will play a growing role.