Analysis of structural characteristics of dust test chamber equipment

Sand dust test chamber Suitable for detecting the shell sealing performance of the product, mainly for two levels of IP5x and IP6X specified in the housing protection level standard. The equipment has a gas stream that is perpendicular to the dust, the test dust can be used, and the entire airway is made of imported stainless steel plate. The bottom of the air stop is connected to the tapered hopper interface. The fan is directly connected to the air, and then in the appropriate position Access the top of the studio to the studio body, form a ldquo; o rdquo; type closed vertical blow circulation system, so that the airflow can smoothly flow, and the dust is uniform.

Equipment structure analysis of dust test chamber :

1, the control portion of the device is designed to the right side, distribution of the device There is a temperature controller, control switch, easy to operate, simple, easy to maintain.

2, the unique airway structure makes the dust circulate in the box.

3, high quality fixed PU activity wheels at the bottom of the dust test box can be easily moved to the position, with a locking device on the active wheel, which can put the instrument fixed.

4, outer box: arc design, beautiful shape, surface electrostatic spray treatment.

5, inner box: SUS304 stainless

steel light board.

6, Box Door: Tempered Glass Door, which is easy to observe the test case.

The following,

dust test chamber

manufacturers come to give you a brief introduction about the extensive dust test box accessories?

1, round rod: for placement of sheet-like test samples, tape the samples on a round rod, so that the surface of the sample is uniformly carried out; [

2, V-type 品 架: It is also used to place test samples, and the sample can be tested in an oblique angle of 15 degrees or 30 degrees;

] 3, the glass nozzle: The salt water is sprayed by pressure by pressure, ejecting from the nozzle.

4, funnel: Used to collect salt fluid, area is 80 square centimeter;

5, the measuring tube: funnel collects salt fluid, After the silica gel pipe reaches the measuring cylinder, it is an important project that determines whether the salt spray corrosion test chamber meets the standard;

6, a row of hoses:For fog;

7, brine bucket: for storing saline;

8, saturated bucket:

dust testBox

warm and humidify the new air and oil filtration.