With thousands of QUV UV aging test machines Used around the world, the current QUV UV aging test machine has become an international standard equipment that has accelerated aging in laboratory. Widely used in coatings, inks, electronic appliances, plastics, automotive coatings, automotive interiors, building materials, etc., product, aging performance assessment.
Light control, moisture simulation, temperature control is an important part of ultraviolet accelerated aging test, the natural aging of the product does not open the three main points Combination of factors.
QUV UV aging test machine equipped with a unique light intensity control function, accurately controlling the irradiation intensity under ultraviolet light irradiation conditions, effectively avoiding machines The irradiation intensity drift that occurs during long-term use. Ensure the correlation between test results and nature and reproducibility.
The outdoor condensing environment is one of the most important factors that cause product erosion. The QUV UV aging test has condensation function to ensure that the test results are consistent with natural moisture, except that QUV / Spray 'is also equipped with water spray functions, which can be used to simulate the rainwater environment.Temperature Control
QUV UV aging test chamber improves the accuracy and acceleration test process by precise control temperature.
QUV and xenon lamp aging
QSQSQ-lab xenon lamp aging test chamber can best simulate all of the spectrum of sunlight, which can generate ultraviolet, visible light and infrared rays. There are two influencing factors of xenon arc light: filter system and light source stability.
QUV test standard
Compliance with ISO, ASTM, DIN, JIS, SAE, BS, ANSI, GM, U.S.GOVT and other standards and national standards.
ASTM G151, ASTM G154, JIS D 0205, SAE J2020
ASTM D3794, ASTM D4587, FED-STD-141B, GM 9125P, JIS K 5600-7-8, ISO 11507, ISO 20340, M598-1990, Nace TM-01-84, Nissan M0007, PREN 927-6
ASTM C1184, ASTM C1442, ASTM D904, ASTM D5215, UNE 104-281-88
Plastic [ 123]ANSI C57.12.28, ANSI, A14.5, ASTM D4329, ASTM D4674, ASTM D5208, ASTM D6662, DIN 53 384, ISO 4892-3, JIS K 3750, UNE 53.104
[ 123] Roofing material
ANSI / RMA IPR-1-1990, ASTM D4799, ASTM D4811, ASTM D3105, ASTM D4434Convergence information, please Call [400-680-8138] inquiry.
QUV UV aging test chamber product parameters
Model QUV / SEQUV / SprayQUV / BasicquV / CW temperature range light cycle 45 ° C -80 ° C 45 ° C -80 ° C 45 ° C -80 ° C 35- Coagulation cycle 40 ° C -60 ° C 40 ° C -60 ° C 40 ° C -60 ° C sample capacity 48 pieces sample (750 mm) 48 pieces (75x150 mm) 50 pieces (75x150 mm) 48 pieces (75 x 150 mm) electrical: ( Maximum power) 120/60, 16A or230/50, 8Aor 230/60, 8A120 / 60, 20A
or 230/50, 9A120 / 60, 14Aor 230/50, 7A
or 230/60, 7A120 / 60, 16A or 230/50, 8A or 230/60, 8A water: condensation (tap water or deionized water)or spray 8 liters / day8 liters / day
7 liters / minute / minages/img/7.jpg8 liters / day does not need tube life (average): 5000 hours 5000 hours 1600 hours 5000 hours
QSQSQ-lab China designated agent, won the outstanding contribution prize for 30 consecutive years