QSQSQ-lab Optical Wear Test Chamber by Using the Maximum Anti-Anti-Nature The xenon arc lamp of the full sun spectroscopy reproduces the destructive optical wave existing in different environments, so that the material can be superiorsed to the material and the weather resistance acceleration test. It can be used for screening of new materials, improved existing materials or changes in durability after assessing changes in material components.
Photoelectric weathering test chamber and XE-3 photocondensing weathering test chamber, 3D samples or flat samples can be placed. The new B02 sunshine fastness trial machine sample rack is transferred. XE-1The photocondensing weathering test chamber is equipped with a lamp, but the function is complete, which is an economical desktop light stability testing machine. Its small size is suitable for a limited budget, or customers who do not often test.
XE-1 The size of the sliding sample disc of the photocondensing weather test chamber is: 9.88 quot; x 18 quot; (251 mm x 457 mm). The sample is installed simply, and it can be drained directly into the room. XE-3 Optical and aging
The test chamber is 3 tubes to increase sample capacity. 17.5 quot; x 28 quot; (451 x 718 mm) size sample disk is almost 4 times that of XE-1 capacity, can be used to test larger, three-dimensional components. It is a full-featured, full size, vertical light stability and weather resistant aging test machine, and is cheap.
B02 The photocondensing weathering test box parameters include spectral, irradiance, relative humidity, casing air temperature, and blackboard or black label temperature. Can provide precise control of test parameters of textiles.Photoelectric weathering test box lighting cycle
For many materials, it is necessary to expose to full-spectral light sources to provide accurate daylight simulation, especially the color and light resistance of the material. QSQSQ-lab Optical Wearing Test Box Xenon arc lamps can most realively simulate full-spectral sunlight, including ultraviolet, visible light and infrared.Long life tube
Usually the life of the lamp is 1500 hours.XE-1
Photoelectric weathering test box type uses a lamp, XE-3 Photoelectric weathering test chamber Use three lamps. The new B02 is also only one lamp. The air-cooled xenon arc lamp of the photocondensing weathering test chamber greatly reduces the operating cost and maintenance costs. The replacement of the lamp is quickly, simple, does not affect the test of the sample.
Selecting an optical filter to simulate different use environments The difference in spectral spectrum may both affect the rate of degradation and affect degradation. The xenon lamp must be properly filtered to produce appropriate spectrum to meet special applications. The three types of filters can be used to simulate different use environments. Use the environment and test methods to determine which type filter used. The long life filter of the QSQSQ-lab photocondensing weather test chamber is very durable, and the desired spectrum can be maintained. After years of use, there is no sign of aging.
Full spectral sunlight
QSQSQ-lab Optical Weather Test Simulation Indoor or Outdoor Illuminated Destruction Caused. The light emitted by the xenon lamp includes ultraviolet, visible light, and infrared rays. The filtered xenon arc is the best method for testing the light stability of the product such as pigment, dye and ink, which is sensitive to long-wave ultraviolet and visible light in sunlight.
This test method provides current The general principles and procedures used to determine the fastness of the textile material.
Welcometable xenon lamp exposure test
This test method provides various textile materials (including coating fabrics and by them). Manufactured products) Test procedures for exposure tests with artificial aging instruments under controlled test conditions.
Method for testing the sealant using the artificial aging apparatusThis test method includes three laboratory accelerated aging exposure procedures. Evaluate solar radiation, thermal and moist on sealant.
Standard test method for low temperature elasticity of latex sealant
This test method specifies that manual aging test is 500 hours Laboratory procedures for latex sealants.ASTM D1148
Standard Test Method for Rubber Aging - Discharge
this test caused by ultraviolet (UV) and thermal exposure
The method specifies the evaluation technique of discoloration of white or light-colored sulfurized rubber, which is irradiated with ultraviolet or ultraviolet / visible light of the designated source, in controlled relative humidity or moisture.Under temperature conditions, it is possible to discolore.ASTM D3424
The standard test method of relative sunlight fastness and weather resistance assessment
This standard describes the printing product in the following cases. Relative sunlight fastness and weather resistance assessment procedures involving natural light exposure test programs or laboratory acceleration exposure test procedures.
Standard Test Method for Exposure Test with Plastic Xenon Lamp in Indoor
The test method specifies that the test methods G151 and G155 are provided. The xenon lamp of the window glass filter reveals the specific procedures and test conditions of the plastic test to assess the stability of plastics in the room.
Optical Wear Test Chamber Application:
Coating Ink, Flower, Plastic, Adhesive, Automobile Motorcycle Industry, Cosmetics, Printing Packaging, Aluminum Profile, Metal, Electronics , Electroplating, medicine, etc.
QSQSQ-lab China designated agent, won the outstanding contribution prize for 30 consecutive years
[ 123] 1. After-sales service support
Installing environmental surveys: Wengkair will arrange professional and technical personnel to go door survey venues, according to different products need, put forward electricity, water supply and exhaust, etc. Requirements, our company issued a picture of a picture and installation preparation manual;
After the customer installation conditions are there, our company promises the province for a week, and the province will be installed at the door;
telephone Follow the return visit: Regular phone contact customers, understand the machine usage, guide daily maintenance, promptly remind the instrument calibration;2. After-sales maintenance support:
1 Product Provide a free warranty, repairs during the product warranty, our company promises to respond 3 hours phone response, timely diagnosis, determination solution; Consumable accessories damaged by quality causes (except for damage from fire, flood, flood, magnetoelectric string, etc.) Foreign repair, our company promises to respond 3 hours phone response, timely identify the problem, give the next method of troubleshooting instructions; if the phone cannot be solved and the customer agrees to pay the door, our company promises a week to solveCustomers bear the replacement of accessories;
Lifetime technology consultation: customers enjoy 24 hours a day free technical consultation.
3, the quality assurance
The accessories that our company are committed are imported. If other origin accessories must inform customers in advance.4, professionals are equipped with
Our company is committed to at least 5 professional engineers, engineers accept the maintenance technical training of original manufacturers, and pass accordinglyTest.