Xenon lamp test chamber

Xenon lamp test chamber product details Details

xénon lamp test chamber Overview

QSQSQ-lab Xe-3 xenon lamp test box can be used for screening of new materials, improve existing materials or assessment The variation of material ingredients and changes in the variation of material components, and can simulate and accelerate outdoor or indoor applications.

Xenon lamp test box model introduction

QSQSQ-lab Xe-3 xenon lamp test chamber adopts 3 lamps to increase sample capacity. 17.5 quot; x 28 quot; (451 x 718 mm) size sample disk is almost 4 times that of XE-1 capacity, can be used to test larger, three-dimensional components. It is a full-featured, full size, vertical light stability and weather resistant aging test machine, and is cheap.

Xenon lamp test box model

full-featured vertical machine, 3 lamp operation, convenient maintenance to meet a variety of standards, cost-effective highlights can be selected from water spray, acid rain, refrigeration device sample plate size 451mm * 718mm

xenon test box application industry

Automobile motorcycle industry, cosmetics, metal, electronics, electroplating, coating ink paint, resin, plastic, printing packaging, aluminum profiles, binders, medicine, etc.

Long life tube

Usually the life of the lamp is 1500 hours. QSQSQ-lab provides 1200 hours of quality assurance service for each xenon lamp tube, QSQSQ-lab Xe-1 xenon test chamber uses a lamp, XE-3 model xenon test chamber uses three lamps. The new B02 xenon test chamber is also only one lamp. QSQSQ-lab's air-cooled xenon arc lamp greatly reduces operating costs and maintenance costs. The replacement of the lamp is quickly, simple, does not affect the test of the sample.

Xenon test chamber wet simulation function

The destruction of outdoor moisture erosion is to simulate by direct pure water spray. By programming, it can be sprayed in light and dark cycle, which can be used to generate thermal shock or physical stress damage.

Relative humidity

QSQSQ-lab Xe-2 and XE-3 model xenon lamp test chamber has a relative humidity control function. When the material is maintained to balance the moisture equilibrium of the surrounding environment, the material produces physical stress, which in turn produces aged due to humidity. Relative humidity can also affect the drying speed of the sample. Humidity control is often required in some extensive test methods. Water purity

Test chamber with spray function for QSQSQ-lab xenon lamp test chamber, must be used to avoid pecramine. Suspended silicon is the main reason for the spot spots. Recommended electrical conductivity lt; 0.1μs and silica content lt; 0.2 ppm deionized water. In order to save expensive pure water, advanced pure water re-purification cycle systems can be used.

Excellent environmental simulation

Exposed samples in the QSQSQ-lab Xe-1 and Xe-3 xenon test chamber fixed on the approximate level plane. During the spray cycle, the surface of the sample will leave a lot of spray water in a considerable period of time. This completely simulates the real use of many products (such as automotive coatings and parts, wood coatings, plastic sheets and some roof materials).

Xon lamp test chamber temperature control

Blackboard thermometer is used to control the temperature in the Q-SUN test chamber. Since its black coating can uniformly absorb all wavelength light, it can be used to characterize the highest temperature of the test chamber. Depending on the rate of irradiation, tube use time ambient temperature, blackboard temperature sensor type and specific test box model, the blackboard temperature can be disposed between 25 ° C to 120 ° C. There are two temperature sensors optional: insulating or non-insulated temperature sensor (black standard or blackboard thermometer).

In QSQSQ-lab Xe-2 and Xe-3, the air temperature in the box can be simultaneously controlled with the blackboard temperature, thereby achieving Comprehensive control of sample test temperature. This low-cost, replaceable temperature and humidity sensor also monitors and controls relative humidity. In the XE-1 test chamber, the air temperature control or blackboard temperature control can only be selected in the box.

Low temperature application

For some indoor products, such as pharmaceuticals and cosmetics, in order to avoid nonsense aging in accelerated tests, lower test temperatures are necessary. Such test requirements can be used as a refrigerator.

Compliance (Part)

AATCCTM 16, AATCCTM 169, AATCCTM 169, ASTM C 1442, ASTM D 2565, ASTM D 3424, ASTM D 4303, ASTM D 4355, ASTM D 4434, ASTM D 4459, ASTM D 4798, ASTM D 5071, ASTM D 6551, ASTM G155, ISO 105 B02, ISO 4892-2, SAE J2412, SAE J2527.

Xon lamp test box lighting cycle

For many materials, it is necessary to expose to full-spectral light sources to provide accurate daylight simulation, especially the color and light resistance of the material. QSQSQ-lab xenon arc lamps can most realively simulate full-spectral sunlight, including ultraviolet, visible light and infrared rays. In the figureThe spectrogram shows that the spectrum of the filter QSQSQ-lab xenon test chamber is very enemied by the sun lighting environment.

xenon lamp test chamber can simulate different use environments

spectral difference It may be both a mode that affects degradation and affects degradation. The xenon lamp must be properly filtered to produce appropriate spectrum to meet special applications. The three types of filters can be used to simulate different use environments. Use the environment and test methods to determine which type filter used. The long life filter of the QSQSQ-lab xenon test chamber is very durable, and the desired spectrum can be maintained. After years of use, the QSQSQ-lab filter has no indication of aging.

QSQSQ-lab China designated agent, won the outstanding contribution prize for 30 consecutive years

Technical service content

[ 1. After-sales service support

Installing environmental surveys: Wengkair will arrange professional and technical personnel to go door survey venues, according to different products need, put forward electricity, water supply and exhaust, etc. Requirements, our company issued a picture of a picture and installation preparation manual;

After the customer installation conditions are there, our company promises the province for a week, and the province will be installed at the door;

Product Operational training: After the product installation is completed, Wengkair will arrange professional and technical personnel will conduct comprehensive training for customers, including the basic structure, working principle, daily operation, maintenance and basic maintenance;

telephone Follow the return visit: Regular phone contact customers, understand the machine usage, guide daily maintenance, promptly remind the instrument calibration;

2. After-sales maintenance support:

1 Product Provide a free warranty, repairs during the product warranty, our company promises to respond 3 hours phone response, timely diagnosis, determination solution; Consumable accessories damaged by quality causes (except for damage from fire, flood, flood, magnetoelectric string, etc.) Foreign repair, our company promises to respond 3 hours phone response, timely determine the problem, give the next troubleshooting instruction; if the phone cannot be solved, the customer agrees to pay the door

, our company promises One week, the customer undertakes the cost of replacement parts;

Lifetime technical consultation: Customers enjoy 24 hours free of charge for 24 hours.

3, accessories quality assurance

Our company promises to provideThe accessories are imported, such as using other origin accessories must inform customers in advance.

4, professionals are equipped with

Our company is committed to at least 5 professional engineers, engineers accept the maintenance technical training of original manufacturers, and pass accordinglyTest.