2021-12-06
In the Q-Fog salt spray testing machine, the sample is exposed to a series of different environments that simulate outdoor and repeated cycles. Simple loops, such as Prohesion cycles, can cycle between salt foams and drying. More complex car test methods may require combination of humidity or condensation, with a multi-step cycle with salt fog and dry.
In a Q-Fog salt spray test machine, it can circulate through a series of most important corrosive environments. Even extremely complex test cycles can be easily programmed with Q-FOG controller.
The Q-FOG salt spray test machine has three types.
The SSP model is used for conventional saline and Prohesion test. The CCT model is used for the maximum circulating car test of salt fog, Prohesion and 100% humidity.
The CRH model has an adjustable humidity range and has more standard applications.
Q-FOG saline spray test machine can circulate in four conditions: fog, dry, 100% humidity (CCT model only) Place. Test status, time, and temperature are controlled by built-in microprocessor. A very simple user interface that facilitates user programming and operation. The operator can quickly create a new loop or select any programmable loop. The Q-Fog controller has a complete self-diagnostic program, including early warning information, regular service reminder, and safety shutdown.
The Q-Fog salt spray test machine has a low-stripline and an easy to open to make the sample installation very convenient. SSP-600 and CCT-600 models have 160 test boards, and the sample size is 75mm x 150mm. The SSP-1100 and CCT-1100 models have a capacity of 240 test boards.
ProductionModel
Q-FOG SSP-600: Traditional salt spray and Prohesion test, the box capacity is 640 liters.
Prohesion and 100% humidity, the capacity of 640 liters.
Q-FOG CCT-1100: Traditional salt fog, Prohesion and 100% humidity, the capacity of 1103 liters.
Q-FOG CRH-600: Traditional salt fog, Prohesion, 0-100% adjustable humidity range, with a capacity of 640 liters.
SSP600 / CCT600 / CRH600 saline spray testing machine
* CRH salt spray box with completely adjustable RH (relative humidity) ) The function replaces the standing, moisture and drying. The SSP type salt spray is not a humidity control function, and the CCT type has 95 to 100% humidity control. SSP 600CCT 600CRH600 Sample Room size
Capacity (including top cover): 640 liters
built-in salt solution tank: 120 Rising
Sample room temperature rangeSpray or standing: 20-60 ° C
Humidity / relative humidity: 25-60 ° C
Spray or Alias: 20-60 ° CHumidity / relative humidity: 25-60 ° C
] Spray or standing: 20-60 ° C
Dry: 20-70 ° C
Humidity / relative humidity: 20-60 ° C
Variostat: 20-50 ° C
Test board capacity100 x 300 mm: 128 (8 test frame X 16 slots)
75 x 150 mm: 160 (10 test stand x 16 Slot)
Sample capacityEach test board bracket: maximum 113 kg
Each hanger: maximum 45 kg
Total Specling chamber (distribution): Maximum 544 kG
Water purity and pressure 0.2-3.8 Bar (3-56 psi) pressure, lt; 8 ppm total dissolved solid, gt; 50 kohm-cm water consumption maximum 2 liters per hour maximum 2 liters per hour maximum 5 Limit / hour compressed air maximum 1.7 lps (3.5 cfm) 3-8 bar (40-120 psi) maximum 1.7 LPS (3.5 cfm) 3-8 bar (40-120 psi) maximum 1.7 LPS (3.5 cfm), 4-10 BAR (60-150 psi) outer dimensions wide X high (top cover is closed): 188 x 102 x 122 (top cover close): 188 x 102 x 122 cm wide X deep x high (top Cover is closed): 275 x 102 x 122 CM power supply requirements 208V ± 10%, 50/60 Hz, 14A230V ± 10%, 50/60 Hz, 13A208V ± 10%, 50/60 Hz, 14A
230V ± 10%, 50/60 Hz, 13A208V ± 10%, 50/60 Hz, 32A230V ± 10%, 50/60 Hz, 32A
CRH air pre-regulator is located in CRH salt The width obtained by the right side of the mist box (at least 5 cm gaps). The air pre-regulator can be selected behind the CRH salt haze. The size of the air pre-regulator (wide x deep x height) is 82 x 93 x 101 cm
SSP1100 / CCT1100 / CRH 1100 saline spray testing machine
SSP 1100CCT 1100CRH1100 sample chamber Size
Capacity (excluding top cover): 857 litersCapacity (including top cover): 1103 liters
built-in salt solution reservoir: 120 liters
sample room temperature range Spray or standing: 20-60 ° C
Dry: 20-70 ° C
Dry: 20-70 ° C
Humidity / relative humidity: 25-60 ° C
Dry: 20-70 ° C
Humidity / relative humidity: 20-60 ° C
Variostat: 20-50 ° C
Test board capacity100 x 300MM: 200 (10 test stand x 20 slots)
75 x 150 mm: 240 (12 test stand X 20 slots)
Sample capacity[ 123] Each test board bracket: maximum 113 kg
Each hanger: maximum 45 kg
Total sample chamber (distribution): maximum 544 kg
water purity and pressure 0.2-3.8 Bar (3-56 psi) under pressure, lt; 8 ppm total dissolved solid, gt; 50 kohm-cm water consumption maximum 2 liters / hour maximum 2 liters per hour maximum 5 liter / hour compressed air maximum 1.7 lps (3.5 CFM) 3-8 BAR (40-120 psi) The largest 1.7 LPS (3.5 cfm) 3-8 bar (40-120 psi) maximum 1.7 LPS (3.5 cfm), 4-10 bar (60-150 psi) profile Size width x deep x high (top cover is closed): 225 x 119 x 127 CM width x deep x high (top cover is closed): 188 x 102 x 122 CM width x deep x high (top cover close): 311 x 119 x 127 cm power supply requirements 208V ± 10%, 50/60 Hz, 20A
230V ± 10%, 50/60 Hz, 18A208V ± 10%, 50/60 Hz, 14A230V ± 10%, 50/60 Hz, 13A208V ± 10%, 50/60 Hz, 32A
230V ± 10%, 50/60 Hz, 32AQualification Honor
QSQSQ-lab China Specified Agent For 30 consecutive years ago
You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!
Home |
Product |
About |
Contact
Email: info@qinsun-lab.com
No. 2578 Gu Dai Road, Shanghai