We Have More Than 10 Years of Experience.
top-ban
  1. HOME > News

Circulating salt spray test chamber

2021-12-06

Circulating Salt Spray Test Chamber Product Details Details

Circulating Salt Mist Test Box Model (see also special tags)

Q-FOG SSP-600: Traditional salt fog and Prohesion test, the volume capacity is 640 liters.

Q-FOG SSP-1100: Traditional salt spray and Prohesion test, the capacity of 1103 liters.

Q-FOG CCT-600: Traditional salt fog, Prohesion and 100% humidity, the capacity of 640 liters.

Q-FOG CCT-1100: Traditional salt fog, Prohesion and 100% humidity, the capacity of 1103 liters.

SSP model: For Prohesion test or traditional salt spray test

Q - FOG SSP circulating salt spray test chamber can make numerous accelerated corrosion tests, including Prohesion, ASTM B117 and G85, Tests such as BS 3900 F4 and F9, DIN 50.021 and ISO 9227.

Prohesion Test provides a more real test using a fast cycle, a rapid temperature-changing low humidity drying cycle and different corrosive solutions. Many researchers have found that the test is useful for industrial coatings.

Continuous saline exposure test is a corrosion resistance test for the most widely used parts and coatings. Applications range from electroplating and coating surfaces, aerospace and military parts, and electrical / electronic systems.

Most tests are carried out in accordance with specific standards, such as ASTM B117 (salt fog) specifications and BS 3900 F4 specification. These tests are widely used in relative corrosion testing. They typically run at higher temperatures, excluding drying cycles, need to heat, humidify the air when spraying.

CCT model: for corrosion research and automotive test function

Q-FOG CCT circulating salt spray test box not only has all SSP type advantages, but also Increase the high humidity function, that is, 100% relative humidity.

Now, the car corrosion test method typically requires the sample to expose the sample to the drying of the recycled salt mist, high humidity, low humidity, and stationary environments.

These test methods were initially converted between several test boxes.

Q-FOG CCT multi-function circulation salt fog test box can automatically perform these cyclic tests in single box.

Circulating Corrosion Test

Prior to circulating corrosion tests, conventional salt fog (35 ˚C continuous salt fog) test is a standard mode of laboratory simulation corrosion. Since the traditional salt fog test method is not simulated outdoorNatural wet / dry cycle, test results are often related to outdoor.

In a Q-FO-circulating corrosive salt spray box, the sample is exposed to a series of different environments that simulate outdoor and repeated cycles. Simple loops, such as Prohesion cycles, can cycle between salt foams and drying. More complex car test methods may require combination of humidity or condensation, with a multi-step cycle with salt fog and dry.

In a Q-FOG cycle salt spray test chamber, it can cycle through a series of most important corrosion environments. Even extremely complex test cycles can be easily programmed with Q-FOG controller. There are two types of Q-FOG corrosion salt hangboxes. The SSP model is used for traditional salt spun and Prohesion test. The CCT model is used for the maximum circulating car test of salt fog, Prohesion and 100% humidity.

Easy to program and sample installation

Q-FOG circulating salt spray test chamber can circulate in four conditions: fog, dry, 100% humidity (CCT model only) and stand. Test status, time, and temperature are controlled by built-in microprocessor. A very simple user interface that facilitates user programming and operation. The operator can quickly create a new loop or select any programmable loop. The Q-Fog controller has a complete self-diagnostic program, including early warning information, regular service reminder, and safety shutdown.

The Q-FO-FO-circulating salt spray test chamber has a low-strip line and an easy to open to make the sample installation very convenient. The SSP-600 and CCT-600 circulating salt spray test chamber have a capacity of 160 test plates, and the sample size is 75 mm x 150 mm. SSP-1100 and CCT-1100 circulating salt spray test chamber have a capacity of 240 test boards.

Fog Dispersion Precision Control

Compared to conventional systems, the Q-FOG cycle salt spray test chamber has a superior fog dispersion, and conventional systems cannot independently change the amount and distance of the settlement. The shift peristaltic pump controls the flow of the corrosive solution of the nozzle, and the air pressure regulator controls the distance of spray. Note that the normal operation of the Q-FOG circulation corrosion salt hook box must be purified.

Internal solubility storage tank

The internal dissolution box of the Q-FOG cyclic saline test chamber can minimize and maintain the space utilization. The capacity of the 120-liter storage tank has a saline filter and a built-in water level alarm in the water storage tank for most test cycles, and the lanes will be reminded when the solution is in a low position.

Fast circulation

Q-FOG cyclic saline test box can change the temperature very quickly because its unique box heater and high capacity power cooling / dry fan. Additional air heaters can perform a very low humidity drying exposure test. Conventional box with water jacketDue to the high heat capacity heat, it cannot be quickly circulated, and low humidity cannot be produced.

can affordable

Q-FOG circulation corrosion salt hook box provides the most advanced corrosion test technology, it reliability, easy to operate, easy to repair - including all this The price is very affordable.

Q-FOG CCT Circulating Salt Mist Test Chamber Advantage:

Do not use the test sample from a test box to another test box without labor spray test samples will not be over Contact Samples result in a result of variation CCT models with a view window on the lid, still placing a lighting, which is convenient to monitor the test.

QSQ-lab China designated agent, won outstanding outstanding 30 consecutive years Contribution Award


Installing Environmental Survey: Wengkair will arrange professional technical personnel to survey the site According to different products, it is proposed to install the installation requirements of electricity, water supply and exhaust, and our company issued a picture of a picture and installation preparation instructions;

Products free installation: After the customer installation conditions are there, our commitment One week, the province is installed for two weeks;

Product operation training: After the product installation is completed, Wengkair will arrange professional and technical personnel will conduct comprehensive training for customers, including the basic structure of the instrument, working principle , Daily operation, maintenance and basic maintenance, etc .;

Phone follow-up: Regular phone contact customers, understand the machine usage, guide daily maintenance, promptly remind the instrument calibration;

] 2. After-sales maintenance:

1 product provides a year free warranty, repairs during the product warranty period, our company promises to respond 3 hours phone response,

Timely diagnosis , Determine the solution; if the phone cannot solve and belong to an emergency failure, our company promises to pay for 48 hours to send free home delivery; non-consumables damaged due to quality reasons (by fire, flood, flood, magnetoelectric string, etc. Except for the customer's factors, we promised to replace free new parts;

2 Product warranty period repair, our company promises to respond 3 hours phone response, timely identify the problem, give the next method of troubleshooting instructions; If the phone cannot be resolved and the customer agrees to pay the door, our company promises to resolve the province's one week, the customer undertakes the cost of replacement accessories;

Lifetime technical consultation: Customer lifetime enjoy a 24-hour free technical consultation. 3, accessories quality assurance

The accessories that our company promised are imported, such as using other origin parts, must inform customers in advance.Lab

4, professionals are equipped with

Our company is committed to at least 5 professional engineers, engineers accept the maintenance technical training of original manufacturers, and pass accordinglyTest.

What Can I Do For You?

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!

toTop