We Have More Than 10 Years of Experience.
  1. HOME > News

Salt spray box


Salt Box Product Details Details

QS-LAB Salt Box Overview

QS-lab Corporation is a global material durability testing products supplier. Founded in 1956, the design and manufacture standard test substrates and aging, light stability, and salt spray corrosion box. In addition, QS-lab Florida, QS-lab QS-lab Arizona and Germany can offer. Commercial offices also provide testing services, its services include: laboratory testing and accelerated aging, light stability and corrosion outdoor exposure test.

salt spray chamber by the assessment of the ability of the protective layer material and salt spray corrosion, as well as the quality of the process is similar to the protective layer comparison, while examination of salt spray corrosion resistance of certain products capacity; the product is suitable for parts, electronic components, the protective layer, and salt spray corrosion test of metallic materials of industrial products.

According to the latest studies show that QS-LAB test results in terms of salt spray corrosion box structure, surface morphology, and the like with the relative corrosion rates very close to natural outdoor corrosion, salt spray tank may provide the most natural corrosion good laboratory simulation environment. Salt spray test

applied to the test Prohesion

Test Prohesion characterized by fast switching between cycles, rapid temperature changes. The spray cycle of a low moisture dry cycle and different corrosive solutions provides a real test environment. Many studies have found that this test is suitable for industrial lacquering tests.

Salt Box works

using Q-Fog salt box, you can run a test loop in the box. With the programmable controller, you can easily set complex test loops or run predetermined programs. The circulating corrosion test is repeatedly tested in different test environment cycles. Includes salt fog, dry, simple tests generally include two different test conditions: salt fog and dry. Complex procedures, such as automotive tests, require multiple cycles.

Salt Box - wet function

● function when running wet, hot steam to the tank through the humidifying means to keep the relative humidity of 100%.

● CCT model can run only damp function.

● maintaining the internal temperature of the steam generator set.

salt box - Salt function

● salt fog function when running, and cycle corrosion test conventional salt spray test chamber function is the same.

● built in an etching solution tank carried by the pump to the nozzle.

● bubbling compressed air through the column in the process leading to the wet nozzle. (Except for Test Prohesion)

● The corrosion solution is atomized by nozzle.

● The casing heater holds the temperature in the set box.

Salt spray - drying function

● A low humidity test condition can be produced in the box. ● When running the drying function, the indoor air is delivered to the test chamber through the fan and heating through the air heater.

● In-box temperature is controlled by the cabinet heater and the air heaters.

Salt hacklet maintenance

● Self-diagnostic function for easy maintenance.

● The built-in self-diagnostic device can prompt when the operator should perform routine maintenance or check the fault. With a personalized panel controller, it can make the operator to program a complex test program.

Q-FOG salt spray box complies with common car test standards (part)

Q-FOG salt spray box specific parameters

For 30 years, the QS-lab After-sales Service Certificate of Excellence, Outstanding Contribution Award

] Technical Service Content

Installing Environmental Survey: Wengkair will arrange professional technical personnel to go door-to-door survey venue, propose according to different products Installation requirements such as electricity, water supply and exhaust, our company issued a picture of the installation preparation of a picture;

Product free installation: After the customer installation conditions are there, our company promises a week, the province is two Zhou Shangmen installation;

After product installation is completed, Weng Kairong

The company will arrange professional and technical personnel will conduct comprehensive training for customers, including the basic structure of the instrument. , Working principle, daily operation, maintenance and basic maintenance, etc .;

telephone follow-up: Regular phone contact customers, understand the machine usage, guide daily maintenance, promptly remind the instrument calibration;


2. After-sales maintenance:

1 product provides a year free warranty, product warranty period repair, our company promises to respond 3 hours phone response, timely diagnostic problem, determine solutions; The phone cannot be solved and an emergency failure, our company promises to deal with special people within 48 hours; the non-consumable material is damaged due to damage due to quality causes (by fire, flood, flood, magnetoelectric string, causing damage to customer factors) Except, our company promises to replace free new parts;

Lab 2 Product warranty period repair, our company promises 3 hours callResponse, timely identify the problem, give the next method of troubleshooting instructions;: Customers enjoy 24 hours a day free technical consultation.

3, the quality assurance

The accessories that our company are committed are imported. If other origin accessories must inform customers in advance. 4, professionals are equipped with

Our company is committed to at least 5 professional engineers, engineers accept the maintenance technical training of original manufacturers, and pass accordinglyTest.

What Can I Do For You?

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!