In the Q-Fog composite salt spray test chamber, the sample will undergo circulating tests simulated different outdoor natural environments. Simple cyclic tests, such as the Prohesion cycle test, only need to circulate test under the two conditions of salt fog and dry. More complex car cycle corrosion tests require multi-step circulation, including humid or gel, salt fog, and dry environments.The Q-Fog composite salt spray test chamber can achieve most important corrosion test methods. For more complex test cycles, it is convenient to use the interface-friendly Q-FOG controller to set the cyclic test program.
What is a circular corrosion test?
The circulating corrosion test is intended to be a more actual salt fog test than traditional static exposure. Because, the actual atmosphere is usually exposed to dry and wet, and the acceleration laboratory test simulates natural circulation conditions. Studies have shown that relative corrosion rates, structures and forms are similar to outdoor in circulating corrosion testing. Therefore, it is generally compared to conventional salt fog test stronger correlation with outdoor correlation, and various corrosion mechanisms (including conventional corrosion, electrical corrosion, and adverse corrosion) can be effectively evaluated.
The spray function of the Q-FOG CRH composite salt spray test chamber can be used in the test specification of certain cars. Special positioning nozzles can be uniformly sprayed over the sample, and the solution flow rate can be adjusted by the user. The spray function has the following advantages: The nozzle is mounted on a stand-alone module, and when the atomization function is enabled, it is easy to remove
sprayed liquid droplets, and the flow is also higher. The time of the lynamotic solution is shorter than the salt fog function
can be programmed directly to the spraying / transfer time forA better control of corrosion
Compared to the conventional system, it cannot independently change the amount and spray distance, Q-FOG CRH composite salt spray test chamber Have more superior salt fog dispersion properties. The flow rate of the etching solution delivered to the atomizing device is controlled by the shifting peristaltic pump; the air pressure regulating means controls the discharge distance of the salt mist. Please note that the normal operation of the Q-Fog composite salt spray test box must use deionized water.
The built-in solution of the Q-FOG composite salt mist
The built-in solution of the Q-Fog composite salt mist can maximize the space utilization, and the maintenance amount minimizes. The capacity of the 120-liter storage tank is a large
Sustained operation for 7 days or more or more. The storage box also has a complete set of particle filtration devices and built-in water level alarms, which can issue an alert to remind the operator when the liquid level is too low.
Q-Fog composite salt spray test chamber can change the temperature very quickly because it is equipped with unique box heaters and efficient cooling. / Dry fan. Additional air heaters can perform a very low humidity drying exposure test. A conventional box with a water jacket cannot quickly convert the test cycle due to heat capacity, and cannot produce low humidity. inexpensive priceQ-Fog composite salt mist test chamber provides advanced corrosion test technology, reliable, easy to operate and maintenance, and low price.
Comparison of product parameters of the same series of salt mist test chamber
Technical Service Content
will conduct comprehensive training for customers, including the basic structure, working principle, daily operation, maintenance and maintenance Basic maintenance, etc .; telephone follow-up: Regular phone contact customers, understand the machineUse the situation, guide daily maintenance, timely reminder instrument calibration;
1 Products provide free warranty, product warranty We promise to respond 3 hours phone response, timely diagnosis, determine the solution; if the phone cannot solve the emergency failure, our company promises to deal with the free home delivery of 48 hours; non-supplies damage due to quality due to quality due (by fire , Except for the causes such as floods, magnetoelectric string and other convincing causes damage to the customer's factors), our company promises to replace free new parts; 2 Product warranty period repair, our company promises to respond 3 hours phone response, Timely identify the problem, give the next method of troubleshooting instructions; if the phone cannot be solved and the customer agrees to pay the door, our company promises to resolve the province, the customer undertakes the cost of replacement parts;
lifetime technical consultation: Customer Enjoy a 24-hour free technical consultation for life.
3, the quality assuranceThe accessories that our company are committed are imported. If other origin accessories must inform customers in advance.
4, professionals are equipped with
Our company is committed to at least 5 professional engineers, engineers accept the maintenance technical training of original manufacturers, and pass accordingly Test.