Double - layer high temperature aging test chamber application. This double-layer high temperature aging test chamber is mainly used for furnace temperature test and heating test in battery safety test. The device uses a single-machine double box design, and one test chamber on both sides, the two cases of control systems and refrigeration systems are fully operated. Performance parameters. The outer dimensions are 1340 * deep 1085 * high 1765mm. Structural mode. Totally, the upper and lower cabinets. Temperature range: room temperature + 10 ° C - + 150 ° C. Room temperature + 10 ° C - + 150 ° C temperature fluctuation: ± 0.3 ° C. The heating time RT + 10 ~ + 100 ° C for about 10 minutes. Temperature uniformity: ≤ ± 2 ° C (no load, constant state). Observation window. Explosion-proof glass plus explosion-proof membrane. Cooling mode. Air cooling control method. The touch screen can programmatically control the PLC, with a USB interface with RJ485. Interface can be connected to computer control, private network control software, convenient remote monitoring, data acquisition. Liner material. 1.0mm thick SUS304 # mirror stainless steel, sprayed Teflon insulation. Outer box material: 1.2mm thick galvanized plate, high temperature plastic chemical powder. Power supply: AC380V 50HZ 9KWAC380V 50Hzac380V 50Hz 9KWAc380V 50Hz Auto
Explosion-proof leshing device, explosion-proof chain, three-color lamp alarm device, remote control device, smoke device, fire extinguishing device, etc. Safety protects each port 100mm, with a soft silicone plug and a stainless steel cover. Fairlead extension features. Provide communication protocols to be used with charge and discharge motors.