Analysis of Salt Mog Corrosion Test Box -qinsun

The salt fog corrosion test box is treated with various materials, including coating, plating, inorganic and organic skin film, and cathode treatment of anti -corruption oil. What should I do if the user fails during use? Kunshan Qinsun instrument lists the following salt fog test box failure analysis for your reference.

1. Salt and fog corrosion test box cannot be sprayed analysis:

1. Failure of solenoid valve

2. The pressure gauge failure or pressure is too low

3 , Check whether the air compressor is running

4. Check whether the nozzle is unobstructed

2. Salt and mist corrosion test box studio cannot rise to the temperature analysis of the adjusted temperature:

1 2. Set the temperature controller to the required temperature

2. Set the safety protection switch than the temperature you need test

3. Insufficient analysis of the spray volume of salt fog corrosion test box analysis analysis analysis :

1. The glass filter in the preheating tank is blocked and washed the glass filter clean;

2. Location, adjust the pressure of the air compressor to the position of 2kg/m2

3. Raise the spray regulator