2022-08-17
1. Adjust the horizontal tensile machine level to make it horizontal state
2. Confirm whether the power supply meets the requirements of the regulations
3. Open the power switch of the control panel, this here, this here, this During the period of each button, indicator light, and control electrical appliances are in power
4. Depending on the correct device paper test parts
5. Adjust the upper and lower strokes to the required range to the required range to be set to the required range. The lower limit position and the selection of appropriate test speed6. Press the opening or rising button to reduce or rise
7. Start the test. At this time Taste value
9. When the test parts of the paper break or destroy, the load maintains the zUI small value
10. Record value
11. Remove the broken or destroyed paper. Testing parts
12. Clamp the paper test parts and display values in the above method to be tested after zeroing
You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!
Home |
Product |
About |
Contact
Email: info@qinsun-lab.com
No. 2578 Gu Dai Road, Shanghai
Copyright © 2021.Qinsun Instruments Co., Ltd. All rights reserved.Sitemap