We Have More Than 10 Years of Experience.
top-ban
  1. HOME > News

Precautions for the operation of the vibration test table -qinsun

2022-08-17

I. Vibration Testing Power Operation Putting Precautions

1. The vibration test table is a test test equipment.

Please do not use this device to specify the purpose of testing and materials.

2. Please improve the installation environment.

Please put it at room temperature.

Places with low humidity. (There are no knots below 80%)

There are few places with dust and dust.

Little vibration.

3. Please install the test material as required.

Install the test material as required, otherwise there may be unpredictable failures.

4. When performing wiring and maintenance operations, be sure to turn off the power.

2. Safety precautions for the vibration test table

In order to prevent accidents and electric shocks in order to prevent the vibration test table from losing control during the operation, please be sure to do operations. Turn off the power first.

● Power supply

For the power supply of this equipment, please pay attention to the following matters.

※ In principle, the power distribution method uses single -phase dual -line single -line grounding. (Please pay full attention to the polarity)

※ Please be sure to ground (protect the ground). *Regarding power and power engineering, please discuss with electrical engineering personnel or people who have the same knowledge.

● Power line

Please use the power cord provided with the device. It was found that the power cord and the power plug were abnormal.

What Can I Do For You?

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!

toTop