We Have More Than 10 Years of Experience.
  1. HOME > News

The operating procedure of hydraulic test machine -qinsun


The hydraulic test machine mainly tests the physical characteristics of raw materials, finished products, and semi -finished products. It can do test results and test materials such as elongation, elongation, stress, and strain of stress, stress, and strain. It can be combined with different fixtures, accessories, two -point extender, and load -heavy elements for various testing, which can connect the computer to control the machine. What are the specific operating procedures for hydraulic testing machines?

The operating procedures of hydraulic testing machines:

(1) Selection of the Dard: the ZUI large load before the test, there is an estimate of the large load of the large load of the ZUI, The corresponding measurement range is selected to control the extreme load at the time of the destruction between 20-80%of the level plate.

(2), according to the system used, ldquo; calibration rdquo;

(3), open the file, and explain the operation according to the file.

(4) Enter the sample size before the test.

(5), new test: save the current test results and start new tests.

(6), Save: Manually save this test data, launch a system for new tests, and automatically save the test data when opening the test data.

(7), the test is over, check whether the operation of the machine is normal, first exit the program, turn off the computer, and then turn off the power control box power supply. And do a good job of equipment use.

What Can I Do For You?

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!