Let you understand the sprinkler system of the alternating salt mist test room
Alternate salt spray sprinkler system in test room1. The air spray must be performed continuously and the continuous automatic supply of brine is essential. To achieve this goal, the brine supply system is arranged. The brine tank is generally placed on the upper part of the chamber. If not properly monitored, the brine will quickly run out or the demand for spraying will not be met.
2. In order to maintain a certain siphon height in the
3. To bring the temperature of the saline entering the mouthpiece close to the internal temperature
p>, a heater must be in the brine supply tank must be installed. Due to the corrosion performance of brine and the required high temperature, the brine supply container is a PVC container, which is controlled by a special temperature controller, so that the brine entering the nozzle meets the requirements.
1,Salt Spray Test Laboratory
2. The airflow atomizing device adopts the structure of a non-crystallization samplepiece and is atomized by a shot. In our experience, some of it will not be atomized after the shot is atomized. atomized, but will fling down, causing a waste of salt water resources. Therefore, a collecting device can be added to collect the brine flowing down, thus making greater use of the brine stock.