Sand dust test chamber instruments maintenance
The sand and dust test chamber is suitable for dust and dust tightness testing of various automotive parts. The test components include lights, instruments, electric dust jackets, control systems, door locks, etc., and test the tightness of the product. Everyone should know that if the instrument of the dust test box is damaged, the equipment cannot perform the test.
First of all, the operator must do a good job dust test chamber The daily operation of the instrument, especially the timing and failure phenomenon, for maintenance and research. Pay attention to the protection of the test instrument, especially the button and connecting cable, strictly prohibit mechanical damage, and immediately stop using it after schade. Especially during the working process, do not turn off the machine at will, develop a good habit, and turn off the power after several operations are completed. After each monitoring, clean the probe with a dry cloth or paper towel and place it on the probe holder after use.
Each time dust test chamberBuy the lotion in its case, clean and dry it to prevent condensation. Operators are not allowed to unpack and transport the instrument within 10 minutes after turning off the machine. For test instruments that will not be used for a long time, unplug the power cord; and place the components in the accessory box.