We Have More Than 10 Years of Experience.
   
   
top-ban
  1. HOME > News

Maintenance temperature shock test chamber

2022-12-16

Maintenance of the test chamber for temperature shock

The left side of the box is provided with a test hole with a diameter of 25 mm or 50 mm or 100 mm , which can be used for external test power cables or signal lines.(opening or number of holes must be added when ordering)Lab

Temperature rate and minimum temperature requirements,
The test chamber adopts a binary cascade air-cooled refrigeration system consisting of a set of Taikang hermetic compressors. The cascade refrigeration system includes a high temperature refrigeration cycle and a low temperature refrigeration cycle. The connecting vessel is an evaporating condenser. The evaporative condenser is also used for energy transfer, and the heat energy in the working space is transferred through a two-stage cooling system to achieve a high temperature. the purpose of. The design of the refrigeration system uses energy regulation technology, an effective treatment method, which can not only ensure the normal operation of the refrigeration unit, but also effectively adjust the energy consumption and cooling capacity of the refrigeration system, so that the operating cost of the refrigeration system can be reduced. And the failure rate drops to a more economic levelche state. Auxiliary parts: expansion valve (Danfoss), solenoid valve (Italy CAS); This product complies with national standards such as GB2423.22-2001 Test N Test Method for Temperature Change and other relevant standards. It is strictly in accordance with GB10592-89 HighTechnical conditions of low temperature test chamber
What Can I Do For You?

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!

toTop