Ultraviolet weather resistant aging box

The gas test is performed to obtain the result of weather resistance. Ultraviolet, rain, high temperature,

high humidity, condensation, darkness, etc. can be simulated, and it is combined into a cycle by reproducing these conditions, and it is automatically performed

The number of rings is the working principle of the test chamber.

 

 

Operational matters of ultraviolet weathering agents:

 

1. During operation, please remember to maintain a sufficient water source.

2. At the test stage, we should minimize

to turn on the time of the box door.

3. There is a sensing device in the workplace, do not suffer a strong hit. 4. After the use of it, if you need to use it again, you must carefully check the water source, power supply, and components, determine if it is correct, and then set

;

5. Because UV radiation has a strong harm to personnel (especially eyes), the operator should minimize contact ultraviolet wire

 

; ((the contact time should be less than 1 min). It is recommended that the operator is fitted with protective eyewear and sheath.

6. Apparatus should be kept dry, discharge the running water after running, dry the studio and box.

7. After use, the plastic enclosure is used to avoid dust intrusion. If there is dust, it should be removed.

 

 

 

can simulate the hazard caused by sunlight, rainwater and dew, QUV utilizes fluorescence ultraviolet (UV) lamp to simulate sunlight

 

Effect, using condensation Wet gas simulation dew, the measured material is placed in a certain temperature and the tidal alternating cycle program

 

is tested. QUV can be used for a few days or weeks of testing, you can save the hazards that have emerged for several years. Harmful type bag

 

comprising: fading, discoloration, loss of light, chalking, cracking, turbidity, bubbles of embrittlement, strength decay and oxidation.

;

;

;