Touch UV aging test chamber

The

Touch Type UV Aging Test Chamber uses the light emitted by the UV lamp to simulate sunlight, uses condensed moisture to simulate dew and water spray to simulate rain. The material to be tested is tested at a certain temperature

in an alternating program of light and moisture. In a matter of days or weeks, the hazards and damage experienced outdoors over months to years can be reproduced, including discoloration, fading, loss of gloss, chalking, cracking, blistering, haze, embrittlement, loss of strength and oxidation of the sample. Widely used in non-metallic materials, plastic casing, LED lighting, packaging materials, ink chemicals, LED optoelectronics, LCD screens, hardware products, metal coatings, displays, photovoltaic panels, rubber, organic materials (such as: rubber,paint, paint , plastics and their products), etc., can help you choose new materials and improve existing materials.

Touch UV aging test chamberTechnical parameters

Model: LQ -UV

Workspace size: 450×1170×500

External dimensions: 700×1350×1450

Temperature range: RT+10℃～70℃

Humidity range: ≥95% RH

Temperature variation: ±0.5°C (no load)

Distance between lamp tubes: 35mm

Distance between sample and Lamp: 50mm

UV lamp: 8pcs (USA)

Lamp power: 40W/pc

UV wavelength: 290nm～400nm

Simulated condensation: the time of the condensation system can be adjusted

The range of UV light exposure and the simulated condensation time: 1~99H

Support example: 300* 75 (mm)

Number of samples: approx. 20 pieces

Test time: adjustable from 1 to 9999H

Irradiation range: ≤50w/m2

Production standard:

GB/T14522-93 Plastics, coating and rubber materials used in products of the machine industry - Artificial climate accelerated test method

GB/T16585-1996 Test method for artificial weathering of vulcanized rubber (ultraviolet fluorescent lamp)

GB/T16422.3-1997 Test method for exposure to light sources in plastic laboratory etc.

Device Usage Conditions:

1. Ambient Temperature: 5℃～30℃, Ambient Humidity: ≤85% R.H.

2. Do not place any objects within 60 cm from the front, rear, left and right of the machine.