Walk-in high and low temperature humidity test room

Walk-in high and low temperature humidity test room can test, test and test for customers

Providing an artificial simulation environment for the testing department of electronic and electrical components, spare parts or related industries to create the best conditions for the accuracy and consistency (repeatability) of test data. The device has simple operating performance and reliable device performance, advanced and convenient operating meter, temperature and humidity controller, imported advanced Chinese liquid crystal display touch screen, and can make various complicated program settings. Dialogue mode, simple and fast operation. It can realize the automatic operation of the refrigerator, largely realize the automation, reduce the operator's working timeand start, stop, switch and keep constant automatically at any time. The work of each system (fan, cooling and dehumidification, humidification, heating) is controlled through the touch screen Centralized control of the machine interface. The transport and space-saving overall assembly is carried out by the customer, the error elimination and acceptance on site is carried out by the customer in order to ensure the performance of the customer; the degree of structural integration is high, and the assembly and debugging time on the customer side is short; scientific air circulation design, ensure the even distribution of indoor temperature and humidity, and avoid dead corners; full safety protections avoid potential safety hazards and ensure the long-term reliability of the equipment; each equipment of QINSUN is customized according to customers' requirements to ensure the equipment's high efficiency, practical and eneenergy saving.

Main performance:

The temperature test range can be selected: A: 0℃~150℃; B: -20℃~150℃; C: -40℃~150℃ ; D: -70℃～150℃

Humidity test industry standard range: 20～98%RH

Variation/Consistency ≤±0.5℃/±2℃, ±2.5%RH / +2～3% RH

Cooling time 20℃～-20℃ about 35 min 20℃～-40℃ about 55 min 20℃～-70℃ about 80 min

Heating time - 20℃～100℃ for about 35min 20℃～100℃ for about 35min 20℃～100℃ for about 35min

Cooling system

1 . System concept: This type of experiment box adopts the temperature of industrial balance technology (cooling without heating), through energy regulation technology, there is no need to start heating to balance the temperature control during cooling and low-temperature balancing. Energy regulation technology, d. H. PID control to regulate refrigerant flow by adjusting the mass of refrigerant entering the evaporator per unit time to achieve precise cooling capacity controland thereby precisely control the temperature of the laboratory.

2. Refrigerant: The environmentally friendly refrigerant R404a is used.

3. Refrigeration hardware: adopt &ldThe Taikang fully-closed compressor forms a refrigeration cycle system.

4. Refrigeration evaporator: A corrugated-fin refrigeration evaporator is located in the intermediate layer of the air duct at one end of the test chamber, and is forced to ventilate by the blower motor, fast heat exchange.

For more information about the walk-in high and low temperature -Humidity test chamber please contact Dongguan QINSUN Testing Instrument Co., Ltd., the company is a genuine direct sales manufacturer, fast service, quality assurance, price advantage, welcome to consult, thank you.