النشرة الإخباريةuv UV Aging Chamber Tester

The UV-Ultraviolet Aging Tester/UV-Ultraviolet Aging Test Box manufactured by QINSUN has its own innovative design and mature technology, which is different from other UV-Ultraviolet -Aging Brands Distinguishes Compared to other testers, it achieves a higher standard in terms of performance, ease of use, accuracy and security, and its verification performance matches or exceeds other brands. Multilingual touch screen interface, data collection via Ethernet connection, full security, optional forced air spray and condensing unit. More non-standard sizes can be customized for customers with high-quality equipment.

1. Technical characteristics:

1. The device is equipped with 8 original 40 watt ultraviolet fluorescent lamps, which were imported from the United States (referred to as UV light)

2. Controlpanel temperature (BPT)

3. Safety protection device: double protection of software and hardware after door opening, low water level protection, over temperature protection, etc.

4. Adhere to industry standards and pass UL and CSA certification

5. The sample rack can be disc or lattice style

6. The controller can be designed with a full touch screen display, elegant appearance and high texture can be programmed.

7. Equipped with a safety interface for irradiance calibration

2. Technical parameters:

1. Irradiance: ultra-low: 0.35W/m2 (UVA, UVB ) Very high: 1.4 W/m2 (UVA), 1.23 W/m2 (UVB)

2. Irradiance uniformity: 4% of sample surface covered

3. Black panel temperature Range: UV Phase - BPT 35-80°C (95-176°F) Condensation Phase - BPT 35-60°C (95-140°F)

4. Sample Capacity: 48+BPT in 24 Sample holder or placed on the sample1140 × 640 × 690 (D width × W depth × H height).

5. Weight: approx. 150 kg, depending on optional accessories

6. Power supply: voltage 220V±10%, single-phase, three-wire system, 50/60Hz, current 8A

7. Spray water pressure: 25-40psi (1.7-2.7bar), purity: dissolved solids, silicon: absolute, conductivity: or 200 kohms or see Test Methods

8. Condensate Requirements: Pressure: 2-60 psi (0.1-4.1 bra), Purity: Deionized water is recommended but not required.

9. Strictly follow the requirements of ISO9001 Quality Management System, ISO14001 Environmental Management System and European CE product certification.

3. Structure material:

1. Inner box size: W1170×H500×D450 mm ( The laboratory space can also be customized according to customer needs)

2. Dimensions: W1480×H1300×D550 m

m (external dimension corresponds to the actual insidedimensional, reasonable and beautiful)

3. Body material: SUS304# stainless steel plate.

4. Pattern frame: aluminum alloy base frame plate

5. Controller: color touch screen Program controller or intelligent RKC controller

6. Irradiation lamp: UVA-340 or UVB-313 8 pieces (optional) 4 pieces per side, 2 sides in total

7. Radiation meter: UVA/ UVB UV radiation meter (optional)

8. Bidirectional online (RS232 communication interface, optional)

9. Residual current device control circuit overload short-circuit alarm, over-temperature alarm, water shortage protection

10. Ultraviolet Wavelength Range:

UVA-340 ranges from 290 to 400 nm to simulate the wavelength of short wavelength ultraviolet light from sunlight to the limit point of sunlight.

The UVB-313 range from 280 to 351 nm is mainly used for quality control, research and development or materials with strong weather resistanceends.

11. Test time: 0~999H (adjustable)

12. Irradiation panel temperature: +50℃~+70℃

13. Standard sample holder : 24 sets