We Have More Than 10 Years of Experience.
  1. HOME > News

UV aging box for helmets


Helmet Ultraviolet Aging Chamber Use special imported UV lamps to simulate the light waves of sunlight, and use condensation and water spray to simulate the climate of dew and rain and the differences between households to really reproduce material aging or damage from a wide range of weather conditions such as exposure to sunlight, drizzle, high humidity and condensation. Types of damage include discoloration, fading, loss of gloss, chalking, cracking, cracking, smearing, blistering, embrittlement, loss of strength, and oxidation. Widely used in helmets, paints, coatings, outdoor color advertising, inks, dyes, textiles, automotive interior and exterior parts, plastics, printing and packaging and other industries. The tested material is tested in a cyclic environmental program that alternates between different climate zones. Dangers that last months to years inIf they occur outdoors, they can be reproduced immediately with short test times. Types of hazards include: fading, cracking, clouding, blistering, discoloration, loss of gloss, chalking, embrittlement, loss of strength, and oxidation.

UV aging box for helmetchoice

LQ-UV1 is single function, only separate UV light Function.

LQ-UV3-A has three functions including light + condensation + spray as the test box simulates the outdoor environment which has sunlight, rainy days and humidity. For weather like Tau, the three functions are very good at simulating a variety of weather and climates. For example, UV light simulates the ultraviolet rays of sunlight, spray simulates rainy weather, and condensation simulates humidification to create high humidity and dewdrops.

LQ-UV3-B also has three functions, but the specifications are different from standard cuts. Thissuitable for PlEtching non-standard size products and irregular sizes that cannot be cut. The LQ-UV3 -A is the same, but the place where the product is placed is different. It adopts a compartment shelf style, which is suitable for irregular products is suitable.


Technical parameters:

Studio size: 450 × 1170×500mm;

Effective Irradiation Area: 450×1170×500㎜;

Body Dimensions: 580×1280×1350mm;

Humidity Range: ≧ 95% relative humidity;

Temperature range: RT+10℃~70℃;

Humidity uniformity: ≦±2%;

Temperature uniformity: ≦±3℃;

TemperatureTemperature fluctuation: ≦±0.5℃;

Humidity fluctuation: ≦±2%;

Lamp center distance: 70㎜;

Samples - and lamp center distance: 50㎜;

Standard sample size: 75×285㎜;

Test time: 0~999H adjustable;

Condensation temperature: 40℃~65℃;

Ultraviolet light and condensation time can be set alternately;

Power supply: AC220V50Hz

Power: 3.5KW

Standard : GB/ T14522-93/GB/T16585-1996 /GB/T16422.3-1997

What Can I Do For You?

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!