High-precision experiment box for constant temperature and humidity

High precision constant temperature and humidity experiment box Suitable for air and Space products, information and electronic instruments, electrical engineering, electronic products, materials, various industrial products or electronic components are tested for their various performance indicators under high and low temperature, constant temperature or humid heat and constant humidity. The control part is located on the right side of the machine, and there are temperature controllers, control switches, etc., easy to operate, simple and easy to maintain. The laboratory selects high-quality materials and uses domestic advanced processing equipment for processing and shaping.
 

Protection system:

1. Overheating of all equipment;

2. Fan overheat protection

3. The overall system is out of phase/out of phase;

4. The cooling system is overloaded ;

5. Cooling unit overpressure;

6. Humidification system water shortage protection;

7. Timing of all equipment;

8. There are other protection features such as leakage, operating instructions and automatic shutdown after a fault alarm.
 

Terms of Use:

1. Installation location

The ground is level and well ventilated

There is no strong vibration around the device

There is no strong electromagnetic field around the device

No flammable, explosive, corrosive substances and dust around the device Proper use and maintenance work around the equipment space,

 

2, power supply conditions

Power requirement: AC380V±10% 50±0.5Hz three-phase five-wire system

Pre-installed power: total power +2.0 kW

3. Ambient conditions

Ambient temperature: 5℃～+30℃ (average temperature within 24 hours ≤30℃)

Ambient humidity: ≤85% RH

4 . Water supply conditions (only for humid heat types and water-requiring devices)

Use pure water, distilled water, deionized water. Resistance ≥ 500Ω.m

5. Other precautions

High-precision constant temperature and humidity test box is suitable for aerospace products, information electronic instruments , electrical, electronic products, materials, various industrial products or electronic components in high and lowTemperature constant temperature or humid heat and constant humidity environment, test the various performance indicators. The control part is located on the right side of the machine, and there are temperature controllers, control switches, etc., easy to operate, simple and easy to maintain. The laboratory selects high-quality materials and uses domestic advanced processing equipment for processing and shaping. Opening the test chamber door during the test will cause temperature and humidity fluctuations in the chamber; if the door is opened many times or for a long time during the test, or the test sample emits moisture, this can cause the heat exchanger to shut down and the cooling system to freeze instead of working properly.