النشرة الإخبارية IP dustproof and waterproof test equipment

Natural dust (sand dust, wind dust, dust, etc.) The destruction of products and materials causes incalculable economic losses every year. The damage caused mainly includes corrosion, fading, deformation, loss of strength, swelling, mildew, etc., especially electrical products are prone to fire due to short circuits caused by sand and dust.

IP dustproof and waterproof test equipment for testing the performance of electronic and electrical products, auto parts and gaskets in use, storage and transportation in sandy and dusty environments. It is suitable for testing Product sleeve sealing performance.

Dustproof and waterproof IP experimental equipment is mainly used for the two IP5X and IP6X tests required by the casing protection standard. The dust used in the test can be recycled, the entire air duct is made of imported Stainless steel sheet, the bottom of the air duct is connected to the conical funnel interface, the fan air inlet and outlet are directly connected to the air duct, and then the corresponding

Connect the diffusion port on the top of the working space to the body of the working space, and close the vertical dust blowing circulation system, to allow the airflow to flow smoothly, maximize the even distribution of dust, according to the test, the must Glow-noise centrifugal fan use the frequency converter to adjust the wind speed.

Main technical parameters:

1． Metal mesh diameter: 50um

2. Nominal spacing between: 75um

3. Stone powder dosage: 2kg～4kg/m3

4th Battle Time: 0～99H59M

5. Fan cycle time: 0～99H59M

The main reference standard is GB4208-93 dustproof test method GB2423.37-89 sand dust test method GJB150.12 sand dust test method GB10485 dustproof test method