النشرة الإخبارية Manufacturer of sand and dust test chambers

Sand dust test chamber manufacturerThe system structure design is advanced and reasonable, conforming to: GB2423, GB4706 , GB4208, DIN, the configuration of the main functional components of this type of testing machine, the technical principle is advanced and reliable, Noise and energy saving are controlled - its performance can replace similar foreign products.

Technical parameters of the sand and dust test chamber manufacturer:

1st temperature in the box

15~45°C.

2. Relative humidity inside the box

45%~75%RH.

3. Nominal net wire diameter

50um.

4. Nominal spacing between lines No more than 70um.

8. The amount of dust in the box

2Kg/m3.

9. Airflow speed

≤2m/s.

10. Dust Blowing Time

0~9999.9h can be set.

11. Sensor

Test box temperature sensor: PT100, baking dust temperature sensor: PT100.

12 . Vibration time

1～9999min adjustable.

13. Test time

1min～99h59min.

14 . Dust blowing time

The dust blowing scroll air pump, dust vibration motor and test time can be controlled separately.

15. Dust Blowing Cycle

Continuous and periodic dust blowing can be set at will.

17. Baked Dust System

1. High-temperature nickel-chromium wire, heat quickly.

2.PT100 temperature sensor, PTD+SSR control, plus temperature switch protection.

18. Dust Blower System

1. Scroll air pump, low noise, strong performance.

2. Overcurrent protection device to avoid damage caused by poor working conditions.

19. Vacuum System

(for IP56 models)

1. Scroll vacuum pump, low noise, low energy consumption.

2. Micro flow meter, intuitively shows the degree of sealing of the measured element

3. Independent vacuum gauge and system differential pressure gauge, the system pressure parameters are clear at a glance.

4. The differential pressure switch controls the gas-saving solenoid valve to regulate the system pressure.

5 The dust filter in the pipeline, disassembled It is easy to maintain and increases the life of the vacuum pump .

6. Add a flow control valve to freely adjust the system pressure.