النشرة الإخبارية High and low temperature humidity and heat test chamber company

High and low temperature wet heat test chamber company Suitable for electrical appliances, electrical engineering, electronics, optoelectronics, communications, instrumentation and other industrial products, spare parts and materials at high temperature Adaptation tests for use, production, storage and transportation in changing environments with high humidity, heat resistance, moisture resistance and dry resistance tests and quality management projects for industrial products

High and low temperature humidity test chamber company Selection parameters:

Temperature range:

A: 0℃-150℃;

B: -20℃-150℃;

C: - 40℃-150℃;

D: -70℃-150℃;

Moisture range:

20% R.H ~98% relative humidity

Temperature variation: ≤±0.5℃;

Temperature uniformity: ≤±2℃;

Moisture uniformity: +2/-3%

(Above 75% R.H.)±5%(Below 75% R.H.)

All the standard equipment of the QINSUN company adopts the French Taikang fully enclosed air-cooled compressor refrigeration; the controller adopts Korean or Chinese Taiwan touch instrument; the United States' DuPont environmental protection refrigerant, the case material is made of SUS304 stainless steel and other advantages, combined with strong technology to create a high-quality constant temperature and humidity test chamber

Chamber with constant Humidity|The box structure of the constant humidity and constant temperature test box:

1. The inner and outer boxes of the constant humidity and constant temperature test box are (SUS304#) high and cold-resistant stainless steel plate.

2.Insulation material: fine polyurethane hart foam and glass fiber wadding. The insulation thickness is 100 mm.

3. The test chamber door has a non-reactive door handle for ease of use.

4. The bottom of the machine adopts high-quality fixable PU moving wheel.

5.Stirring system: Use stainless steel long-axis motor, high and low temperature resistant aluminum multi -Wing impeller to achieve strong convection and vertical diffusion circulation.

6.Double-layer high-strength, high-temperature resistance sealing tape is used between the door and the box to ensure the airtightness of the test area.

7.The observation window is made of multi-layer hollow tempered glass, and the inside is pasted with conductive film (the Checking process can be clearly observed).

8. A test hole (on the left side of the machine) 50mm (original) can be used for external test power lines or signal lines (the hole diameter or the number of holes needs to be increased to indicate).