النشرة الإخبارية dust test chamber

Sand dust test box applies to the dustproof of outdoor products, auto parts, electronic and electrical products, LEDs, instruments and electrical enclosures provide an important test basis for scientific product development and quality control to ensure appropriate Provide environmental simulations and accelerated testing.

Sand dust test box conforms to the standard:

This device can provide appropriate environmental simulation and accelerated testing for scientific research, product development and quality control. The device meets the standards GB2423. 37-2006La2 Sand Dust Test Method, GB 4208-2008 Enclosure Protection Level (IP Code ), GB/T4942-93 Low-Voltage Electrical Appliance Enclosure Protection Level”, GB/T 10485-2007, GB 7001-96 “Dustproof Test” and other requirements.

Control-system:

1st control instrument; import number display knob type control instrument

(1) Blowing time (IS-99h adjustable)

(2) vibration time (IS-99h adjustable)

(3) Loading time (IS 99h adjustable)

(4) Working time (IS-9999h adjustable)

2. Main accessories: blower, vibration motor, heating pipe, filter mesh.

3. Equipped with vacuum actuator components (vacuum gauge, filter, gas flow meter, quick connectors) Note: (vacuum pump not included)

4. The test workplace can be equipped with sockets with corresponding dust-proof electric plugs.

Technical parameters:

1. Model: LQ-IP-216

2.Studio Size: 600(D) X600(W) X 600(H)

3. The dust used is marked through the metal screen Nominal wire diameter: 50 µm, nominal distance between wires is 75 µm; .

4. Airflow speed: no more than 2m/s; .

5. Optional timing for continuous and periodic dusting;

6. Dust concentration: 2kg/m3;

8. Test dust: dry stone powder, etc.;