النشرة الإخبارية Xi'an rain test chamber

The Rain Test Chamber is mainly used for rain test (waterproof) on products in industries such as automobiles, electronic devices and photography. Under the simulated rainy climate conditions, the product's physical and other related properties are tested. After the test, the product's performance is judged through verification as meeting the requirements, to facilitate the design, improvement, verification and factory inspection of the product.

Xi'an Rain Test ChamberProduct features:

1. The inside and outside of the box are all made of stainless steel, and the area is a visible glass window

2. The test frame speed is 0~1rpm(adjustable)

3.It features a Tbest time control unit. precipitation temperature control. Use control flow test control

Main technical parameters of rain test chamber:

Execution and compliance of rain test chambers with standards and test methods:

GB10485-89 Basic Environmental Test 5.6 Waterproof Test for External Lighting and Signaling Devices of Automobiles and Trailers

GB4208 -84 chassis protection class classification

Design principle:

below Set up a water tank to pump water through the stainless steel Water pump in the right control box to pump and pressurize, and then send it to the nozzle of the side water spray tube device. The nozzle sprays water in a constant direction on theSamples the turntable, and then sprinkle into the water tank to form a water circuit. System. Controls such as flow meter, pressure gauge and solenoid valve are arranged at the outlet of the water pump. The inner box is equipped with a waterproof turntable and the speed is controlled on the panel.