UV carbon arc lamp test chamber

Ultraviolet Carbon Arc Lamp Test Chamber can simulate the damage caused to industrial materials by ultraviolet light, rain and dew UV -Fluorescent lamps from United States Atlas simulate the effects of ultraviolet light in sunlight by simulating humidity and

Dew, use spray to simulate rainy and rainy weather.

Ultraviolet carbon arc lamp test chamberTechnical parameters:

High temperature: normal temperature +10~70℃; Panel Measurement Range: 45~80℃.

High humidity: ≥90% relative humidity.

Temperature variation: Variation: ±3℃; Temperature resolution: 0.1℃.

The center distance of the lamp: 70mm (the center distance between the test product and the lamp tube: plate base frame test plate (adjustable up and down).

Lamp model: UVA-340 (315~400nm), UVB-313 (280~315nm) optional, 6 lamps are standard for this party.

Lamp brand: American ATLAS original.

Irradiance: adjustable within 1.0W/m2/340nm (can be adjusted accordingly to adjust light intensity output).

Controller: 7-inch true color programmable touchscreen controller (QTEST) from Taiwan, China.

Provide a comprehensive and detailed real-time monitoring and curve recording for key test parameters such as irradiance, temperature and time (the controller has a recording function), and the computer can also generate reports and print curves.irradiation/condensation/water spray test can be performed separately, and each combination of irradiation/condensation/water spray test can also be programmed.

Uses true color touch screen control system, which has good stability, monitoring, operability and maintainability.

Provide a life reference for UV lamps using expensive materials (the lamps are consumables with a lifespan of about 1600 hours), which is convenient for users to measure the Confirm lamp replacement time and save the cost. The irradiance measuring and control device (sun eye) can be used to measure and control the irradiance, so that the irradiance can be automatically stabilized at the set value and the lamp life can be significantly extended.

The design of the automatic waterer supply and drainage is adopted, and the high-performance, high-cost mercury water is used to ensure the flow rate and uniformity of water spraying.

Most of the main components are used, and a small part is made by domestic brands, which improves the safety and reliability of the product. (For details, please refer to the attached list of main accessories).

The installation and wiring of the electrical part of the device must be carried out in accordance with electrical standards.

Notes: Sample restriction conditions: This tester prohibits: explosion, testing and storage of samples of volatile substances, testing and storage of samples of corrosive substances.