Plastic UV detector

Plastic UV Detector can The test machine, which simulates the dangers caused by sunlight, uses fluorescent UV lamps to simulate the exposure to sunlight, and the tested materials are placed in the light for testing at a certain temperature. Hazards that occur outdoors over months or years can be reproduced in days or weeks. Hazard types include: ancestral color, discoloration, loss of luster, pink light, cracking, peeling, clouding, air bubbles, fat change, strength reduction, decay and oxidation, etc. Widely used in ink, paint, resin, plastic, printing and packaging, adhesives, automotive and motorcycle, cosmetics, metal, electronics, electroplating, medicine and other industries.

Plastic UV detection Default:

GB/T 14522 Artificial weathering test methods for plastics, coatings and rubber materials used in mechanical products

GB/T 16422.3 Laboratory light source exposure test methods for plastics Part 3: Fluorescent ultraviolet light

GB/T 16585 Vulcanized rubber, artificial climate aging (fluorescent UV lamp) test method

ASTM 4329, D4587, D5208, G154, G53; ISO 4892-3 and other current UV aging test standards

Studio size: 1140×690×640mm(W*H*D).

cabinet dimensions: approx. 1300×1630×700mm (W*H*D).

Temperature range: RT+10℃～70℃.

Humidity range: ≧95% RH.

Temperature fluctuation: ≦±0.5℃.

Humidity variation: ≦±2%.

Humidity uniformity: ≦ ±2%.

Temperature uniformity: ≦±3℃.

Light center distance: 70㎜.

Distance between pattern and lamp center: 50㎜.

Default pattern size: 75×285㎜.

Effective irradiation area: 450×1170×500㎜.

Test time: 0~999H customizable.

Blackboard temperature: 40℃～65℃.

UV light, condensation time can be set alternately.