Sand Dust Test Chamber Programmable Multifunctional Sand Dust Test Chamber

Programmable Multifunctional Sand Dust Test ChamberThe sand and dust of a certain concentration are blown over the surface of the test specimens at a certain flow rate by a fan to evaluate the penetrating effect of these test specimens (equipment) when they exposed to dry sand or a dusty atmosphere, ability to withstand the abrasive or blocking effect of sand and gravel, and ability to store and operate. The sand and dust test chamber can perform a non-laminar vertical dust-bearingDeliver airflow and circulate the dust-carrying airflow, start, stop, automatic timing or continuous control.

This test box can meet GB2423, GB4706. Level test requirements.

Yes Programming of the technical parameters of the multifunctional sand and dust test chamber:

Temperature range: RT+5C~+40C; (The temperature will rise when the test time is too long)

Dust specification: can pass through the screen 75um, metal diameter is 50um square hole drying

Dosage: 2kg ~ 4kg/m3

Sample rack load: s30kg

Test dust: dry, portland cement, fly dust, etc.

Vibration mode: intermittent, continuous (adjustable)

Dust Blowing Mode: Intermittent, Continuous (Customizable)

Power supply: AC380V +10%50Hz/AC220V+10%50Hz:

Timing: continuous 1~9999 (S, M, H), cycle 99~99 (S, M, H ) adjustable

Reference standard: GB2423.37-89(L a).GB4208-93.IEC60529: 2001.DIN40050IEC60068-2-68(La), meet the protection level IP5X.IP6X standard