النشرة الإخبارية UV testing machine

UV aging device | UV aging box | UV aging cabinet is suitable for anti-aging testing of light resistance and artificial light sources of non-metallic materials. The light source adopts 4 (cabinet type) or 8 (box type) UV-ultraviolet fluorescent lamps with a rated power of 40W as the light source (in the United States there are two types of light sources, UVA340 and UVB313, for the user to choose from and configure ). Reference Standard GB/T14522-2008 National Standard of the People's Republic of China - Plastics, Coatings, Rubber Materials for Machine Industry Products - Artificial Weathering Accelerated Test Method GB/T16585-1996 National Standard of the People's Republic of China - Artificial Weathering of Vulcanized Rubber (Fluorescence Ultraviolet Lamp) Test Method” and GB/T16422.3-1997 “Plastic Laboratory Light Source Exposure Test Method” and other related standards require design and production.

Structure

Material composition: Shell material: high quality A3 steel plate spray treatment

Inner tank and sample rack material: imported SUS304 stainless steel plate, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; good hot workability such as stamping and bending, no hardening phenomenon in heat treatment (non-magnetic, working temperature -196℃~800℃)

The drainage system uses vortex type and U-shaped sedimentation device to drain water.

The heating method is the tank heating of the inner tank, the temperature rises rapidly, and the distribution is uniform

The surface of the sample and the UV lamps plane distance is 50mm, parallel (around the to meet requirements of relevant national standards)

The bottom of the UV aging machine | UV aging box | UV aging cabinet uses high quality PU fixed moving wheels

Technical parameters:

1. Adjust conform to ISO, ASTM, GB, DIN, SAE, JIS, BS, GM, ANSI, U.S.GOVT and other standards and national standards

2. The condensing device simulates the influence of outdoor humidity and can 100% Reach humidity

3. There is a sun eye online monitoring system to control the intensity of radiation

4. The temperature measured by the board temperature sensor is accurate, and the test results can be reproduced repeatedly

5. Light, humidity, condensation and splashing water can be tested continuously in one cycle, and can also be tested with a fixed value.