النشرة الإخبارية UV testing machine

UV aging device | UV aging box | UV aging cabinet is suitable for anti-aging testing of light resistance and artificial light sources of non-metallic materials. The light source adopts 4 (cabinet type) or 8 (box type) UV-ultraviolet fluorescent lamps with a rated power of 40W as the light source (in the United States there are two types of light sources, UVA340 and UVB313, for the user to choose from and configure ).

Reference Standard GB/T14522-2008 National Standard of the People's Republic of China - Plastics, Coatings, Rubber Materials for Machine Industry Products - Accelerated Test Method for Artificial Weathering GB/T16585-1996 National Standard of the People's Republic of China - Artificial Weathering of Vulcanized Rubber (Fluorescent ultraviolet lamp ) Test Method and GB/T16422.3-1997 Plastic Laboratory Light Source Exposure Test Method and other related standards require design and production.

Construction

Material composition: Shell material: high quality A3 steel plate spray treatment

Inner tank and sample rack material: imported SUS304 stainless steel plate, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; good hot workability such as stamping and bending, no hardening phenomenon in heat treatment (non-magnetic, working temperature -196℃~800℃)

The drainage system uses vortex type and U-shaped sedimentation device to drain water.

The heating method is the tank heating of the inner tank, the temperature rises quickly, and the temperature distribution is uniform

The surface of the sample and the plane spacing of the UV lamp is 50mm and parallel (to meet the requirements of relevant national standards)

UV aging machine | UV aging box | UV aging cabinet floor with highhigh-quality fixed PU wheels.

Technical parameters:

1. Comply with ISO, ASTM, GB, DIN, SAE, JIS, BS, GM, ANSI, U.S.GOVT and other standards and national standards

2. The condensing unit simulates the influence of outdoor humidity and can reach 100% humidity

3. There is a solar eye online monitoring system to control the radiation intensity

4. The temperature measured by the board temperature sensor is accurate, and the test results can be repeated and reproduced

5. Light, humidity, condensation and splash water can be tested continuously in the cycle and also with fixed values.