النشرة الإخبارية Solar UVB Intensity Testing Machine

Sunlight UVB Intensity Tester To simulate the damage caused by the sun's UV light, the test is conducted by exposing the tested material to controlled high temperature light to test the material's resistance to weathering.

Ultraviolet Test Aging Box|Ultraviolet Test Aging Box|The UV intensity detector uses UVA and UVB fluorescent ultraviolet lamps, which can simulate the UV spectrum in sunlight, combined with temperature control, spraying, humidification and other devices to simulate factors such as sunlight (UV segment), high temperature, high humidity, condensation, dark cycle, etc., which cause discoloration, brightness, strength decline, peeling, cracking, chalking, oxidation, etc. The synergistic effect between air and and water spray will weaken or invalidate the material's single light resistance or single moisture resistance, so it is widely used to evaluate the weather resistance of materials. The equipment can have a goodProvide sunlight UV simulation, low maintenance cost and easy use. The device uses program control to run the test cycle automatically, with a high degree of automation, good light stability, and high reproducibility of test results.

Main Technical Parameters of Solar UVB Intensity Tester:

Based on standards: ASTM-G53, ISO-4892, 4799, D4587, BS-27282, SAE-J2020.

Temperature range: RT+10~70℃.

Humidity range: 80% ~ 95% RH.

Distance between sample and lamp: 50±2mm.

Method of temperature and humidity control: balanced adjustment temperature and humidity control (BTHC).

Standard sample holder 75×150×1.5mm (note that you can also call QINSUN to customize non-standard size).

Between the light tube

Center distance: 70mm UV lamp wavelength: 280-400nm .

It can display intensity and integrated value. RS-485 communication interface is optional.

Power: 220v/50Hz/±10% 5KW (total power consumption, actually only use a third of the power when running).