Multi-Purpose Sand Dust Test Chamber
Multifunctional dust test chamber is a device that predicts the dust resistance quality of industrial and electronic products by measuring the dusty environment and the staartificially simulated. For example, protecting various parts from sand and dust when the car is running on the road can provide realistic simulations of various environmental tests such as dust and dust that electronic products and their components may be exposed to during transportation and use.
Mmultifunctional dust test chamberThe technical parameters are as follows:
1. Temperature in the box
15~45 °C
2. Relative humidity inside the box
45%~75%RH
3. Nominal net wire diameter
50um
4. Line nominal spacing between
no larger than 70um
8. Dust consumption in the box
2Kg/m3
9. Airflow Velocity
≤2m/s
10. Dust Blowing Time
0~9999.9h adjustable
11. Sensor
Test temperature sensor box: PT100, temperature sensor baking dust: PT100
12. Vibration time
1～9999min adjustable
1min～99h59min
14. Dust blowing time
can each blow dust swirl air pump and dust vibration motor and test time can be controlled.
15. Dust Blowing Cycle
Arbitrarily select the time setting for continuous and intermittent dust blowing.
16. Vibration time
Vibration and stop vibration time are alternated automatically.
17 Dust baking system
1. High temperature nickel chrome wire, fast heating
2.PT100 temperature sensor, PTD+SSR control, plus temperature switch protection< /p>
18. Dust blowing system
1. Spiral Air Pump, Low Noise, Strong Power
2. Overcurrent protection device to prevent damage caused by bad working conditions
19. Vacuum system
(Applies to IP56 models)
1. Scroll vacuum pump, low noise, low energy consumptioncustom
2. Miniature flow meter, visually indicates the degree of sealing of the measured element
3. Independent vacuum gauge and system differential pressure gauge, system pressure parameters at a glance
4. Differential pressure switch controls air-saving solenoid valve to precisely control system pressure
5. Dust filter in pipeline, easy disassembly and maintenance, improve vacuum pump life
6. Add a flow control valve to freely adjust the system pressure
You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!
- Basket-type thermal shock box
- IP waterproof test chamber
- Maintenance of the UV weathering test chamber can only be done in these 7 things.
- How to make more efficient use of the maintenance of ozone aging test chambers?
- UV test chamber with simulated sun
- النشرة الإخبارية Manufacturer of high and low temperature wet heat testing machines
- النشرة الإخبارية Manufacturer of formal humidity chambers in Shanghai
- النشرة الإخبارية rapid alternating high and low temperature damp heat box
- النشرة الإخبارية Qingdao UV aging tester
- Thermal shock test chamber with two boxes
Home |
Product |
About |
Contact
Email: info@qinsun-lab.com
No. 2578 Gu Dai Road, Shanghai
Leave Message
WhatsApp