النشرة الإخبارية Low temperature test chamber for bathrooms

Bathroom Low Temperature Test Chamber is from high Temperature cycle to low temperature, cycle from low temperature to high temperature, cycle between different programs, etc. The temperature range can be set and selected at will by the customer, and the number and time of cycles can also be set and selected by the customer.

It is mainly suitable for industries such as electronics, electrical engineering, electrical appliances, aerospace, plastics, optoelectronics, hardware, photovoltaic, chemicals, plastics, paints, coatings and other industries such as: electronic parts, auto parts, notebook computers and other products for virtual temperature and climate environment experiments.It is mainly used to detect the performance response of materials in different environments, and to test the performance responses of different materials, such as heat resistance, cold resistance, moisture resistance, and dry resistance. It is suitable for testing the quality of products and semi-finished products in industries such as electronics, electrical engineering, electrical appliances, mobile phones, communications, instruments, vehicle accessories, plastic products, metals, optoelectronics, chemicals, building materials, medical supplies, and aerospace.

Bathroom low temperature test box Technical parameters:

There are 5 optional inner sizes:

Corresponds to a volume of 150 liters: width 50x height 60x depth 50cm;

Corresponds to a volume of 225 liters: width 50x height 75x depth 60cm;

volume corresponds to 408 liters up to: width 60x height 85x depth 80cm;

Corresponds to a volume of 800 liters: width 100x height 100x depth 80cm;

A volume of 1000 liters encorresponds to: width 100x height 100x depth 100cm.

2. Outer box size: width 950* height 1600* depth 950MM (outer dimensions are adjusted to inner dimensions, special types can also be customized)

3. Temperature range: 0℃/-20℃/-40℃/-60℃/-70℃～+100℃（+150℃）

4. Temperature Control Accuracy: ±0.2℃

5. Temperature Uniformity: ±0.2℃

6. Heating time: about 3 degrees per minute< /p>

7. Cooling time: about 1 degree per minute

8. Inner box material: high quality SUS304 stainless steel

9. Box Material: You can choose stainless steel or high quality sheet steel with baking color.

10. Insulation material: polyurethane foam (insulation material):

(its advantage is:

1. Energy saving, no gaps after filling, strong bonding after curing.

2. Impact and pressure resistant, no cracking, no corrosion, no falling off after curing.

3. Has extremely low temperature thermal conductivity, weather resistance, and heat resistance.

4. Insulation, soundproofing, waterproof and moisture-proofnd after curing.

5. Good waterproof performance because the foam holes are closed, the sealing rate reaches 95%, rainwater will not seep through the holes. )

6. Air circulation method: centrifugal fan + broadband forced air circulation (top and bottom)

7. Heating: heating drmade of nickel-chromium alloy

8. The protections that must be equipped with every QINSUN equipment include: over-temperature protection, no-fuse switch, fuse, dry-run protection, liquid level protection, compressor over-pressure, over-heating, over-current protection and other protections.

All configurations are brand names, such as compressors, refrigeration accessories, etc. are brand names, quiet design, effectively reduce equipment operating noise, to ensure the stability of the cooling system, the controller adopts a full range of imported microcomputer color screen , Chinese and English display, can show the cause of the error, easy to eliminate. Special air circulation design, good temperature and humidity distribution uniformity.