النشرة الإخبارية Low temperature test chamber for bathrooms

Bathroom Low Temperature Test Chamber is from high Temperature cycle to low temperature, cycle from low temperature to high temperature, cycle between different programs, etc. The temperature range can be set and selected at will by the customer, and the number and time of cycles can also be set and selected by the customer It is mainly suitable for industries such as electronics, electrical engineering, electrical appliances, aerospace, plastics, optoelectronics, hardware, photovoltaic, chemicals, plastics, paints, coatings and other industries such as: electronic parts, auto parts, notebook computers and other products for virtual temperature and climate environment experiments.

It is mainly used to detect the performance response of materials in different environments, and to test the performance responses of different materials, such as heat resistance, cold resistance, moisture resistance, and dry resistance. It is suitable for testing the quality of products and semi-finished products in industries such as electronics, electrical engineering, electrical appliances, mobile phones, communications, instruments, vehicle accessories, plastic products, metals, optoelectronics, chemicals, building materials, medical supplies, and aerospace.

Cryogenic test chamber for bathroomsTechnical parameters:

1. Inner box size: width 400 x height 500 x depth 400 mm (thisthe standard small size, please call QINSUN customer service for more sizes)

There are 5 optional innsOther sizes:

Corresponding to a volume of 150 liters: width 50x height 60x depth 50cm;

Corresponds to a volume of 225 liters: width 50x height 75x depth 60cm;

Corresponds to a volume of 408 liters: width 60x height 85x depth 80cm;

Corresponding to a volume of 800 liters: width 100x height 100x depth 80cm ;

Corresponds to a volume of 1000 liters: width 100x height 100x depth 100cm.

2. External dimensions: width 950 x height 1600 x depth 950 mm (The external dimensions will be adjusted to the actual internal dimensions, and non-standard types can also be adjusted)

3. Temperature range: 0℃/-20℃/-40℃/-60℃/-70℃～+100℃（+150℃）

4. Temperature control accuracy: ±0.2℃

5. Temperature uniformity: ±0.2℃

6. Heating time: approx. 3 degrees per minute

7. Cooling time: about 1 degree per minute

8. Inner box material: high quality SUS304 stainless steel

9. Outer box material: stainless steel or high-quality sheet steel with stove-enamel finish.

10. Insulation Material: Polyurethane Foam (Insulation Material):

(its advantages are:

1. Energy-saving, seamless after filling, binding is strong after curing.

2. No corruption, no spillage.

3. Featuring super-low

Thermal conductivity, weather resistance, and heat protection.

4. Insulation, soundproofing, waterproof and moisture-proof after curing.

5. Good waterproof performance because the foam holes are closed, the sealing rate reaches 95%, rainwater will not seep through the holes. )

11. Air Circulation Method: Centrifugal Fan + Broadband Forced Air Circulation (Up and Down)

12. Heating element: Nickel-chromium alloy heating wire

13. The protections that must be equipped with each device from QINSUN include: over-temperature protection, no-fuse switch, fuse, dry protection, liquid level protection, compressor over-pressure, over-heating, over-current protection and other protections

All configurations are brand names, such as compressors, refrigeration accessories, etc. are brand names, quiet design, effectively reduce equipment operating noise, to ensure the stability of the cooling system, the controller adopts a full range of imported microcomputer color screen , Chinese and English display, can show the cause of the error, easy to eliminate. Special air circulation design, good temperature and humidity distribution uniformity.