النشرة الإخبارية Plastic box High and low temperature test chamber

Plastic box high and low temperature test chamberFeatures:

● The structural design of the test system is advanced and reasonable, and the manufacturing process standard, beautiful appearance, generous.

● The customization and assembly of parts and components are well matched, and the main functional components are all made of Yuan Zhuang Jin Ko parts with Guo Ji Xian Jin level, which improves the safety and reliability of the product and long-term and hoch guaranteed -Requires user frequency usage.

● Interactive man-machine touchscreen input system, easy to learn and powerful;

● 100 program groups, 1000 segments can be set, the number of cycles can reach 999 times , and the maximum time for each segment can be set to 99 hours and 59 minutes;

● It has RS232 communication interface, which can be controlled and monitored by PC at will kann, and an RS485 interface is also optional, which is convenient to use;

● with program correction, delete, appointment, start, power failure, memory, key lock and other functions;

● It has a variety of alarm functions, and when there is an error, it can be displayed on the screen to fix the error;

du te air circulation design, good uniformity of temperature and humidity distribution;

● Automatic anti-freeze vacuum double glass, which can clearly observe the test samples in the test chamber.

Plastic box high and low temperature test chamberTechnical parameters:

1. Temperature range: -20~+150℃/-40~+150℃/-50~+150℃/-60~+150℃/-70~+150/-85~+150℃.

2. Control stability: ±0.5℃

3. Uniformity of distribution: ± 2℃

4. Control accuracy: ±0.1℃

5. Normal heating time: -+20℃ ~+150℃ less than 40 minutes of non-linear idle.

6. Normal cooling time: +20~-20℃ less than 45 minutes/+20~-40℃ less than 60 minutes/+20~-50℃ less than 65 minutes. +20~-60℃ less than 70 minutes/+20~-70℃ less than 75 minutes/20~-85℃ less than 100 minutes nonlinear idle.

Box structure.

1, internal size: W*H*D 400×500×500mm (larger or smaller). can be selected or adjusted ).

2. External dimensions: 950 mm x 1600 mm x 950 mm (suitable design possible depending on the customer's installation location).

3. Inner box material: mirror stainless steel plate (SUS#304).

4. Outer packing material: painted steel plate or stainless steel plate (SUS#304).

5.cooling system frame material : national standard angle iron + national standard channel steel + Stainless steel plate with special texture treatment (SUS#304).

6. Insulation material: rigid polyurethane foam + glass wool.

7. Heating element: Ribbed stainless steel heating tube.

Default configuration:

1. A set of multilayer heating and defrosting glass windows with lighting.

2. Two sample racks made of SUS304 stainless steel.

3.2 sets of stainless steel test rack rails with adjustable spacing.

4.Test line hole (25, 50, 100mm) 1, with a stainless steel hole cover, a silicone rubber plug.

5. 5 pieces of gauze for testing.

6. A set of online software and a data cable.

7. A set of fuses. (Parts at risk)

8. One set of controller operating instructions and one set of device specificationsinstruction manual.