النشرة الإخبارية Rapid Temperature Cycle Test Chamber

Rapid Temperature Cycle Test Chamber is an aviation, essential testing equipment in the fields of communications, automobiles, optoelectronics, electronics, home appliances, scientific research, etc., used for experiments and tests to determine industrial products and materials for damp heat, high temperature, low temperature cycling or endurance testing simulated environmental changes product parameters and performance changes .

Introducing device features:

Fast Temperature Cycle Test ChamberHas the superior design and appearance of the standard type and viewing window with a wide field of view: a rectangular viewing window , use of energy-saving lamps to maintain the test, the inside of the test box is bright, and the built-in glass of the heating body is used, and no need for a demisting wiper, so the conditions in the test are maintained Free box to turn up in front of customer at any time.It also adopts platinum high stability temperature sensing resistor bodyand works together with the wind speed circulation system, which meets the temperature and humidity test, and can simulate the test conditions of various environments, such as high temperature, high humidity, low humidity, low temperature, constant temperature and low humidity, etc., with easy-to-fold operation methods and learning a highly accurate programming system provides the best testing performance.

Humidification system piping is separated from controller circuit board: Humidification system piping is separated from power supply, controller and circuit board Avoid damage caused by leakage in the piping. Affect the circuit, improve safety and life.

Simple water supply device: the water supply tank is located in the lower right part of the front of the test chamber, which is convenient for manual water supply, and the automatic water supply device can also be customized and injected before ordering Ming, thank you.

Technical parameters:

Inner box volume: 80 liters, 100 liters, 150 liters, 225 liters, 416 liters, 800 liters, 1000 liters (non-standard size and heating and coolingspeed can also be adjusted)

Different heating and cooling speeds can be generated according to customer requirements Fast and slow temperature change rate: 5°C/min, 3°C/min, 8°C/min, 9° C/min, 10°C/min, 15°C/min (linear or non-linear optional)

It can do multiple tests, such as B. rapid temperature changes (stress screening), condensation test, temperature cycle, etc loads of the tested product. The full real-time test curve analysis shows that no time limit. Meet electronic device product stress testing, lead-free process, MIL-STD-2164, MIL-344A-4-16, GJB- 1032-90, MIL-2164A-19, NABMAT-9492, GJB/Z34-5.1 .6, IPC-9701... and other test requirements.

Specification table:

Temperature stability: ±0.5℃; Humidity control accuracy: ±2% RH

Temperature distribution uniformity: ±2.0℃ (no load); Humidity Uniformity: ≤±3% RH (+2, -3% RH)

Control system Large LCD touch screen Temperature and humidity controller (Korea Sanwon, Japan OYO or China Taiwan Taitong can be freely selected), the data can be displayed intuitively.

Inner box material: SUS304# high quality stainless steel sheet; Outer box material: cold-rolled steel plate powder body color or high quality SUS304# brushed stainless steel plate can be selected.

Cooling method: 1. Compressor refrigeration system cooling (no consumables, suitable for long 2. liquid nitrogen untassisted cooling (liquid nitrogen is a consumable, suitable for short-term low-frequency use tests)

Various protection devices: leakage current, short circuit, overtemperature, low water protection, air burn protection switch, alarm device.

Power supply AC 1Φ3 220V 50/60HZ or AC 3Φ5 380V 50/60HZ differ Please note the marking on the offer plan.