Anti-ultraviolet light test deviceBy irradiating the product or material under testTested in an interactive cycle of artificially controlled ultraviolet light and humidity and water spray while the temperature was increased to conduct testing in harsh ambient temperatures. The test equipment uses the imported American Lateras ultraviolet lamp to simulate the ultraviolet light in the sun, at the same time it can simulate the influence of moisture through condensation and the influence of rain through spraying. It is an indispensable testing instrument in the fields of aviation, automobiles, home appliances, scientific research, etc. It is suitable for schools, factories, research institutes and other units.
Technical parameters:
Inner size: ca. 1140×400×350mm (W*H*D)
External dimensions: approx. 1300×600×500mm (W*H*D)
Temperature range: Normal temperature +10~70℃; Blackboard measurement range: 45~80℃
Temperature Variation: Variation: ±3℃; Temperature Resolution: 0.1℃
The center distance of the lamp: 70mm (the center distance between the test product and the lamp tube: plate-shaped base frame test plate (adjustable up and down)
Lamp model: UVA-340 (315~400nm), UVB-313 (280 ~315nm) optional, 8 lamps are standard for this party.
light tube brand: American ATLAS
★irradiance: adjustable within 1.0W/m2 (can be output according to the adjusted light intensity )
Controller: Korean high-quality SUS304 stainless steel , It has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; It has good hot workability such as stamping and bending, and has no hardening phenomenon in heat treatment ( non-magnetic, operating temperature -196 ° C ~ 800 ° C ).
UV-UV Radiation Aging Test Box Functional Area Introduction:
1. Irradiation system (simulated sunlight): Light source: 4 imported UV fluorescence lamps with a rated powerFrom 40W (USA Atlas brand) there are UVA-340 and UVB-313 light sources that the user can select and configure.As with other lamps, the aging of UV lamps causes the lamps' performance to decrease without Solar Eye Control systems use the position rotation method to compensate. This system can be used for many application standards but has inherent limitations. This position rotation method cannot compensate for the effects of different lamp batches or differences in the surrounding environment.
UV ageresistance lighting test machineProbe | Sun Eye | UVA340 UV Irradiation Detector Purpose:
It is used to measure and control the irradiance emitted by the UVA340 lamp tube in the UV aging test chamber, so customers can see the irradiance emitted by the lamp tube anytime and anywhere because the Lifespan of all UV aging lamp tubes is limited. It is limited, about 1600~2500 hours lifespan, because its strength will not reach a certain lifespan, the user cannot accurately determine the intensity value emitted by the lamp tube if there is no online measurement and monitoring of the UV irradiation detector with UV aging test box probe | solar eye | UVA340 gives • As a result, some lamp tubes are reaching the end of their service life but not going out, but the radiation intensity reaches
If the value is below the requiredn value of the national standard, no matter how long the test is carried out, it has no effect.With UV aging test chamber probe|solar eye|UVA340 UV irradiation detection, the device can provide a life reference for expensive imported UV lamps used for It is convenient for users to confirm the lamp replacement time and save the operating cost. It can measure and control the irradiance, so that the irradiance can be automatically stabilized at the set value, and greatly extend the life of the lamp tube.
UV aging test chamber probe | solar eye | UVA340 UV irradiance detector value:This system is a precise control system, it can automatically maintain the set light intensity through a feedback loop. The controller can continuously monitor the UV light intensity and adjust the lamp power to compensate for changes in the light intensity to compensate for that caused by lamp agingor other factors are caused solar eye irradiance The reproducibility and repeatability of the test results of illuminance control are better than manual irradiance control.
You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!
Home |
Product |
About |
Contact
Email: info@qinsun-lab.com
No. 2578 Gu Dai Road, Shanghai
Copyright © 2021.Qinsun Instruments Co., Ltd. All rights reserved.Sitemap