النشرة الإخبارية can simulate sunlight test chamber

Sunlight Test Chamber is mainly used to simulate the outdoor climate over several days or weeks by placing the sample in the test area, so that the hazards encountered outdoors can be reproduced over several months to years And Defects, including discoloration, fading, loss of gloss, chalking, cracking, foaming, haze, embrittlement, loss of strength and oxidation of the sample. This device not only can simulate the damage of materials by UV light, but also has the function of rain and dew as standard. It uses the light emitted by the UV lamp to simulate the effect of sunlight and uses condensed moisture for rain and dew. The material to be tested is subjected to an alternating program of light and moisture at a specific temperature. UV light aging data can help you select new materials, existing mateImprove your product and evaluate how changes in this article might affect the shelf life of your product.

Can simulate a sunlight test chamber Function introduction:

There are two types of LQ UV series, namely LQ -UV3 LQ -UV1-S

The main differences between the two models are:

LQ-UV1-S: Used for UV light simulation in outdoor sunlight test, with artificial irradiance control, adjustment, etc.

LQ--UV3: Equipped with UV light and condensation, water spray system, including nozzles, piping, control and drainage devices, short-term spray can simulate thermal shock, long-term spray It can be used to simulate mechanical erosion caused by rainwater erosion .

Main features:

★The installation and wiring of the electrical parts of the devices are carried out in accordance with international electricalelectrical standards .

★ Provides comprehensive and detailed real-time monitoring and waveform recording (controller with recorder function) for key test parameters such as irradiance, temperature, time, etc., and can also generate reports and waveform printing on computer.

★irradiation/condensation/water spray test can be performed independently, and any combination of irradiation/condensation/water spray test can also be programmed.

★Adopt Korean true color touch screen control system, which has good stability, monitoring, operability and maintainability.

★ Provide a life reference for imported UV lamps using expensive materials (the lamps are consumables, the lifespan of about 1600-2500 hours), which is convenient for users to confirm the replacement time of the lamps and savings to achieve the usage costs. Through the irradiance measurement and-Control device (sun eye) can be used to measure and control the irradiance, so that the irradiance can be automatically stabilized at the set value, and the lamp tube life can be greatly extended.

★ Adopt automatic water supply and drainage, and use large ones Hydro power*, ensure water spray flow and uniformity.