النشرة الإخبارية Solar radiation test chamber for electronic products

The Solar Radiation Test Chamber for Electronic Products manufactured by QINSUN has its own innovative design and mature technology. Higher standards of reliability, accuracy and security, their verification performance meets or exceeds other brands. Multilingual touchscreen interface, data collection via Ethernet connection, extremely high security, optional forced air spray device and condensation device. More non-standard sizes can be customized for customers with high-quality equipment.

Electronic product solar radiation test chamber Technical features:

1. The equipment is equipped with 8 original 40-watt ultraviolet fluorescent lamp (UV lamp for short) imported from the United States

2. Panel temperature control (BPT)

3. Safety protection device: double protection of software and hardware after opening the door, Wwater level protection, over-temperature protection, etc.

4. Complying with industry standards and passing UL and CSA certification

5. The probe rack can choose slice type or grid rack style

6. The controller selects a full touch-screen programmable display, which is beautiful and generous with high quality.

7. Equipped with a safety interface for irradiance calibration.

Technical parameters:

1. Irradiance: ultra-low: 0.35W/m2 (UVA, UVB) ji Height: 1.4 W/m2 (UVA), 1.23 W/m2 (UVB)

2. Irradiance uniformity: Covering 4% of the sample surface

3, Panel temperature range: UV Stage - BPT 35-80°C (95-176°F) Condensation Stage - BPT 35-60°C (95-140°F)

4. Sample Capacity: 48 one + BPT on 24 sample holder or placed on the sample tray of 1140 × 640 × 690 (D width × W depth × H height).

5. Weight: about 150 kg, depending on the optional accessories Depends

6 power supply: voltage 220V±10%, single-phase three-wire system, 50/60Hz, current 8A

7. Spray water pressure: 25-40psi (1.7-2.7bar), purity: dissolved solids, silicon: absolute, conductivity: or 200k ohms or see Test Methods

8. Condensate Requirements: Pressure: 2-60psi (0.1-4.1bra); Purity: deionized water recommended but not required.

Strictly follow the requirements of ISO9001 Quality Management System, ISO14001 Environmental Management System and European CE product certification.