النشرة الإخبارية Ozone Aging Tester

Ozone Aging TesterIt is suitable for aging crack testing of non-metallic materials and rubber products. Determine the aging resistance of its products.

Ozone Aging TesterParameters

1. Product specifications: inner mold size D×W×H 500×500×600: mm

2. Temperature range: 0℃～70℃, RT+10℃ ~ 70℃

3. Humidity range: 40%~98% R.H., 65%～98%R.H

4. Temperature variation: ≤±0.5℃

5. Temperature uniformity: ≤ ±2℃

6.Temperature deviation: ≤±1.5℃

7. Humidity fluctuation: +2, -3% R.H

8. Heating rate: 0.7~1, 0℃/min

9. Cooling rate: normal temperature to 10℃≤20min / not restrictive

10. Ozone concentration: 10~500pphm

11. Gas flow rate: 12~16mm/S

12. Ozone sample rack: Static and dynamic sample rack for tensile tests (when orderinglevel)

13. Rack speed: 360 degree rotating sample rack (speed 1 rpm)

14 . Time setting range: 0~9999 hours

15. Power requirements: AC380(±10%)V/50HZ three-phase, five-wire

Box material:

1. The case is made of high quality A3 steel plate CNC machine tool tool, and the surface of the case is treated with anti-static plastic spraying, which is smoother and more beautiful;

2. The inside The tank is made of high quality SUS304 mirror stainless steel sheet;

3 Insulation material is high-density fiberglass cotton, and the insulation thickness is 100mm;

4. The stirring system uses long shaft fan motor, high and low temperature resistant stainless steel multi-blade impeller, and vertical convection diffusion circulation to achieve strength;

5. Double-layer high-voltage heat-resistant sealing tapes are used between the door and the box to ensure the airtightness of the test area;

6. The bottom of the machine adopts high-quality fixed moving PU wheels;

7. The observation window is made of multi-layer hollow tempered glass and the inside isglued with a conductive foil;