النشرة الإخبارية Low Temperature Cycler Manufacturer of high and low temperature test chambers

Low temperature cycle machine high and low temperature test box manufacturer Applicable products of high and low temperature detection test box include: instruments, electrical, storage devices, power chips, Wire products, bus equipment, interface drive equipment, telephones, sports equipment, electronic hardware and plastic products, communication lines of various specifications, cable electronics products, home appliances, auto and motorcycle accessories, chemical coatings, aerospace products and other related products parts.

High and low temperature test chamber low temperature cycle machine manufacturerThe performance of high temperature test chamber and low temperature detection test chamber manufactured:

1 Temperature ranges can be selected: A: 0℃～＋150℃, B: -20℃～＋150℃, C: -40℃～＋150℃, D: -60℃～＋150℃, E: -70℃～＋150℃.

2. Degree of temperature fluctuation: ±0.5℃.

3. Temperature Uniformity: ≤2.0℃.

4. Heat-up time: less than 40 minutes from room temperature to +150°C, non-linear idle.

5. Cooling time: from +20°C to -70°C withinof 100 minutes, non-linear idle.

6. The rate of temperature change is the average rate of change in air temperature, not the rate of change in product temperature.

execution default:

GB10589-2006 Low Temperature Test Chamber Technical Conditionsngen

GB10592-2006-40°C high and low temperature test chamber technical conditions

GB11158-2006 Technical Conditions for High Temperature Test Chambers

GB/T2423.1- 2001 Test A: Low temperature test method

GB/T2423.2-2001 Test B: High Temperature Test Method

GB/T5170.2- 1996 Basic parameter verification method of environmental testing equipment for electrical and electronic products

Customer Service

a. Bid customers the necessary usage and technical maintenance advice;

B. Parts and Replacement Parts ;

c Send customers to provide on-site instructions on how to use and maintain their high and low temperature cycle testing machines;

d. From the date of Acceptance, the device is within the one-year quality guarantee period, provided that the buyer abides by the rules of storage, use and installation, if the test box cannot work normally due to their own quality problems, the seller will within 2 days of notificationng get maintenance personnel to perform free maintenance. It is also possible to negotiate a maintenance period according to the buyer's specific situation and requirements; force majeure and human factors are not included in this scope.