النشرة الإخبارية Large-scale UV pretreatment test chamber

Large UV pretreatment test chamber is generally suitable for indoor products to do light aging tests, when outdoor products are not only suitable required to carry out light aging, plus spraying to simulate rainy weather and condensation to simulate humidified climate to carry out a comprehensive climate aging test. The design of the three-function test box is not small, and it needs to be equipped with 8 lamp tubes standard. And add two more systems, so the total possibility is much larger, regardless of the function, volume and other requirements, i.ewhich can be customized with QINSUN company.

Large UV pretreatment test chamberTechnical parameters:

inner size: approx. 1140 × 400 × 350mm (W*H*D)

External dimensions: approx. 1300×600×500mm (W*H*D) < /p>

Temperature range: normal temperature +10~70℃; blackboard measurement range: 45~80℃

★Temperature variation: Variation: ±3℃; Temperature resolution: 0.1℃

Lamp center distance: 70 mm (centre distance between test product and lamp tube: plate base frame test plate (adjustable up and down)

Lamp model: UVA-340 (315-400 nm), UVB-313 (280-315 nm) optional, 8 lamps is default for this party.

Lamp brand: American ATLAS

★Irradiance: adjustable within 1.0 W/m2 (can be output according to the set light intensity)

★ Controller: Korea TEMI880 (with temperature and humidity panel temperature display)

★Inner box material: The inner plate is made of high quality SUS304 stainless steel, which has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; It has good thermal workability such as stamping and bending, and has no heat treatment hardening phenomenon (no Magnetic, use temperature -196℃～800℃).

UV aging test chamber Zhongshan City, UV lamp weather light aging test The instrument simulates ultraviolet sunlight damage and performs weather resistance tests on materials by exposing the tested materials to light at controlled high temperature. It uses UV lampen to simulate the radiant effects of sunlight, which takes just a few days or weeks. In just a short amount of time, UV exposure equipment can reproduce damage that would take months or even years outdoors, including fading, discoloration, tarnishing, chalking, cracking, cracking , wrinkling, blistering, embrittlement, strength reduction, oxidation, etc. the test results can be used to select new materials, improve existing materials, or evaluate changes in material formulations.