We Have More Than 10 Years of Experience.

** Non-standard electromagnetic vibration test bench**|LQ-50XPTW laptop computer, six-dimensional, all-in-one machine [random. sinusoidal] triaxial (simultaneous. single. continuous) vibration (up and down. left and right. front and back) (0.5~3000Hz) electromagnetic vibration table on the same table.

** Non-standard electromagnetic vibration test bench**|LQ-50XPTW laptop all-in-one machine in six-dimensional space Parameters:

1: [model] LQ-50XPTW Laptop Six-dimensional all-in-one machine [random. sine] [triaxial (simultaneous. individual. continuous) vibration on the same table]

(X/Y/Z axis, top/bottom/left/right/backward)(0.5~3000Hz)

2:【Vibration Table Divided by Frequency】 0.5~3000Hz

3:【Vibration table control mode】 Functional computer type (50XPTW [random. sinusoidal] [same table-triaxial (simultaneous. individual. continuous) vibration] series)

4: [vibration direction] laptop six-dimensional space all-in-one machine [random sine] [three axes on the same table (simultaneous individual .continuous) vibration] (up /down/left/right/ backward)

①【Single Vibration - Three Modes】

【Three axes (X.Y.Z) can be adjusted separately, the vibration mode of this axisFM: FM/Sweep/Programmable/octave/log

(frequency/time/amplitude/acceleration can be set arbitrarily)】

Y axis/top and bottom -- separate vibration

X-axis/ left and right - separate vibration

Z-axis/front and back - separate vibration

②【二waves vibrate together -- three modes can be selected at any time, which combination order]

【three axis (X.Y.Z) can be Do not adjust it separately, the vibration mode of this axisFM: FM/sweep/programmable/octave/logarithmic

( frequency/time/amplitude/acceleration can be set arbitrarily)]

[Y-axis top/bottom/X-axis left-right] - two axes together Vibration

[Y axis up and down/Z axis front and back] --two waves vibrate together

[X-axis left and right/Z-axis front and back]--two axes vibrate together

[Two axes at onceiselect g] - two axes vibrate together

③【Two-axis continuous vibration---six modes can be selected at any time, which combination order】

[Three axes (X.Y.Z) can be adjusted separately, and the vibration mode of this axisFM: FM/Sweep/Programmable/Time Frequency/Logarithmic

(frequency/time/amplitude/descdenial can be set arbitrarily)】

First (Y-axis up and down) and then (X-axis left and right) - two-axis continuous vibration/and infinitely repeatable

First (X-axis left and right) and then (Y-axis up and down) - two-axis continuous vibration/and infinitely repeatable

First (Y-axis up and down) and then (Z-axis front andrear) - biaxial continuous vibration/and infinitely repeatable

first (z-axis front and back) and then (y-axis top and bottom) – two-axis continuous vibration/and infinitely repeatable

first (X-axis left and right) and then (Z-axis front and back) - two-axis continuous vibration/and infinitely repeatableFirst (Z-axis front and back) and then (X-axis left and right) – betwuniaxial continuous vibration/and infinitely repeatable

[Choose (this axis) to vibrate first and then (another axis) to vibrate]/Continuous vibration on two axes

④【[Y axis up and down/X axis left and right/Z

Axis front and back] Three axes vibrate together at the same time]【Three axes (X.Y.Z) separately adjustable, frequency modulation of axis vibration mode: FM/sweep/programmable/octave/logarithmic

(frequency/time/amplitude/acceleration can be set arbitrarily)]

⑤【Three-axis continuous vibration - six modes】 Three-axis can choose sequential continuous vibration at any time

[Three axes (X.Y.Z) canen can be customized, and the vibration mode of this axisFM: FM/Sweep/Programmable/ Octave/logarithmic

(frequency/time /amplitude/acceleration can be set arbitrarily)】

(Y axis up and down)→(X axis left and right)→(Z -front and rear axis)--Tri-axis continuous vibration/and infinitely repeatable

(Y axis top and bottom)→(Z axis front and backen)→(X-axis left and right )--three-axis continuous vibration/ And can be repeated infinitely

(X-axis left and right)→(Z- Axis front and back)→(Y axis up and down)--three axis Continuous vibration/and infinite repeat

(X -Axis left and right)→(Y-axis top and bottom)→(Z-axis front and back)- -Tri-axis continuous vibration/and infinitely repeatable

(Z-axis front and back)→(Y-axis top and bottom)→(X-axis left and right)--Triaxial continuous vibration/and infinitely repeatable

(Z-axis front and back)→(X-axis left and right)→(Y-axis top and bottom)--Triaxial vibrate continuously/and repeat infinitely

Randomize [axis to vibrate first → then vibrate on second axis → vibrate on third axis ] Three-axis continuous vibration

5: [vibration mode] [control panel + 1 platform + 1 laptop system ] Six-dimensional laptop all-in-one machine [random.sine]

(three axes on the same table vibration (simultaneous/individual/continuous)]

【All-in-one machine with six degrees apart (X/Y/Z axis, up/down/left/right/backward) [same three-axis mesa vibration (simultaneous/individual/continuous)]】

【Three axes ( X.Y.Z) to be set separately, then wave vibration mode FM: FM/Sweep/Programmable/Octave/Logarithmic

(frequency/time /amplitude/acceleration Can be set arbitrarily)]

①【Single vibration - three modes】

②【Two axes vibrate together --Three modes can be selected at any time, which combination order】

③【Two-axis continuous vibration --- six modes can be selected at any time, which combination order】

④【[[Y-axis up and down/X-axis left and right/Z-axis front and back] three axes vibrate at the same time]

⑤[Druniaxial continuous vibration - six modes] Triaxial continuous vibration can be selected at any time.

⑥【Random Power Spectral Density (P.S.D)】

⑦【Total Root Mean Square Value of Acceleration Grms】

⑧【Multi-order random vibration】

⑨[Street bar vibration at all levels]

⑽ [The six-dimensional space moves together]

⑾【Simulation【round (spherical)】vibration】

⑿【Analog【Oval Type] Vibration]

6: [vibration waveform] laptop six-dimensional space all-in-one machine [random.sine] [three on same table axis (simultaneous. single. continuous) vibration] sine wave - selectable (half-wave or wave)

【Six Degree Spatial All-in-One Machine (X/Y/Z Axis, Up/Down/Left/Rright/backward) [triaxial (simultaneous/single/continuous) vibration on same table]]

【The three axes (X.Y.Z) can be individually set, and the vibration mode of this axisFM: FM/Sweep/Programmable/Octave/Logarithmic

(frequency/time/amplitude/acceleration can be set arbitrarily)]

①【Separate vibration - three modes】 can be any choice (half welle or wave)

②[Two axes vibrate together: three modes selectable at any time] Any selection (half-wave or wave)

③【Two-axis continuous vibration---six modes can be selected at any time】

④ [[Y-axis up/down/X-axis left-right/Z-axis front and back] three axes vibrate at the same time] any choice (half wave or wave) ⑤ [Three axis continuous vibration - six modes] The three axes can be selected at any time (half wave or wave)⑥【Random Power Spectral Density (P.S.D)】You can choose any one (Half Wave or Wave) < /p>

⑦【Total Root Mean Square Value of Acceleration grms】You can choose any one (half wave or wave)

⑧【Multi-order random vibration】You can choose any one (half-wave or wave)

⑨【Mold Vibration of Roads on All Layers】You can choose any one (Half Wave or Wave)

⑽[Six-dimensional space moves together] any choice (half wave or wave)

⑾【Simulation【Circular (Spherical)】Vibration】You can choose any one (Half Wave or Wave)

⑿【Analog【Oval】 Vibration】You can choose any one (half wave or wave)

7: [Vibration Frequency] [Vibration Frequency] 0.5~3000Hz can be set arbitrarily (±0.1%)

[Y axis/top-bottom-0.5~3000Hz X-axis/left-right-0.5~3000Hz Z-axis/front-back-0.5~3000Hz] can be adjusted arbitrarily (±0.1%)

8:【Large test load (kg)】Not mainly 100kg

0~50kg (amplitude: 0~7 / maximum acceleration: 0~22g) (same price as 100kg)

0-100 kg (amplitude: 0-5.0 mm/ maximum acceleration: 0-20 g) is not supplied for this model

0~150kg (amplitude: 0~4mm / maximum acceleration: 0~15g) (same price as 100kg)9:【Size of the vibrating table H】 ■(6-10)mm①Frequency resonance is good to ensure stability around increase 1x

②Countertop Material (Random Delivery) □Special Aluminum Alloy (Primary Color) □Blue (or Custom Color)

③Through holes on the table (mainly units): a: There are 28 (10mm) b: Belt through holes--*24 c: Fixture (fixture) through holes--*24

④Measure the test screw holes -----*4pcs (5mm)

⑤ Magnetic Leak Prevention: Zone Range (30cm): reduce magnetic leakage by 50-70%

10:【Top body (H/high)】 ■Ultra-low platform/lower and more stable ( 0.5% more stable per 1 cm less) (currently our company's height is low in the market) < /p>

Laptop six-dimensional all-in-one machine [random. sinusoidal] [triaxial (simultaneous. individual. continuous) vibration to same table] (top and bottom/left/right/front and back)

Table body: 50*55*50CM Table top: 500*(6-10) *500mm Bottom: 500*500mm

②The lower the more stable/higher the bigger the distortion and the bigger the error

③ Anti-Resonance Theme (Add 3 Anti-Resonance Technologies)

④ Center shaft anti-dust technology

⑤ Central axis increase: Overcurrent (3 times) / Overheat resistance 210 degrees / Moisture resistance 98% / Explosion resistance / Dust resistance

⑥LQ-50XPTW Electromagnetic Vibration Test Bench|LQ-50XPTW Portable Computer Six-dimensional Space All-in-One Machine Components:

a: high inductance electromagnetic coil b: silicon steel sheet with ultRahigh inductance - E-sheet/bottom sheet, I-sheet/top sheet generator c: spring steel sheet: special treatment

d: support frame e: base f : Countertop g: Padding

⑦It is not affected by the change in total mass, change in supporting force or exciting force

⑧ due to countertop/ base / The support frame / spring steel sheet is in the electromagIntegrated magnetic coil, which can more effectively improve the uniformity and stability, and will not be restricted by irregular objects, causing the center point bumps and stability problems, reducing the cost of fixtures. p>

⑨ Vibration mode: the middle horizontal line is 0, vibrates up and down, which really meets the requirements of the amplitude mm (p-p) and the high frequency solves circularly

Disadvantages of the electromagnetic vibration table

⑩ Real solution: It is difficult to solve the high-frequency electromagnetic vibration table technology (within 50Hz/5mm/20g/weight 100kg) that will not be affected

⑾Dustproof (can be used in places with high dustiness)/ultra-low temperature resistance/high temperature resistance/moisture resistance (anti-static)

11:【Amplitude】 ■(Arbitrarily adjustable range mmp-p): 0-5.0 mm (collision is not allowed)

0~50kg (amplitude: 0~7 / maximum Acceleration: 0~22g) (same price as 100kg)

0~100kg (amplitude: 0~5.0mm/maximum acceleration: 0~20g) is not shipped for this model< /p>

0~150kg (amplitude: 0~4mm / maximum acceleration: 0~15g) (same price as 100kg)

a: With no load, the maximum displacement is 5 mm (p-p), in this case no collision,

b: Under half of the heavy load, the maximum displacement can reach 5mm (p-p)

c: Under heavy load conditions, the maximum displacement can reach 5mm (p-p)

※ This situation must not collide, if it is less than this shift value, the checking engine itself is enough to load

①Frequency: 0.5~40HZ can reach 5mm: collision is not allowed

a: At a frequency of 1 Hz and with no load, the maximum displacement is 5 mm (p-p), and in this case no collision is allowed,

b:in If the frequency is 50Hz and there is no load, the maximum displacement is 4mm (p-p), and in this case no collision is allowed

c: at a frequency of 40 Hz and less than half the heavy load, the maximum displacement can reach 5 mm (p-p), less than this displacement value

d: At a frequency of 20 Hz and high load, the maximum displacement of the vibration platform is 5 mm,

This situation cannot be collided if it is less than this shift value, the test machine itself is enough to load

②Frequency: 0.5~55Hz mainly based on amplitude none; Space: normal; Background color: rgb(255, 255, 255); Text alignment: justify;>③Frequency: 1Hz is 5mm, maximum acceleration can be 0.01g, 35Hz 5mm, the maximum acceleration can be reached 12.25g

12: Maximum acceleration can be set arbitrarily 0~20g(200m/s2)

①Frequency: 45~3000HZ can reach 20g

②Frequency: 55~3000HZ mainly with high acceleration

③ Frequency: 80Hz is 20G, large amplitude It can be 1.56mm, 3000Hz is 20G, and the maximum amplitude can be 0.028mm

④Under a frequency of 10Hz and no load, this situation cannot collide, and the maximum acceleration reading is -1g

⑤Under a frequency of 50Hz and no load, this situation cannot collide, and the maximum measured acceleration value is -20g

Acceleration (unit g)=0.002*(50Hz)2*4(amplitude unit mmp-p)=20g(196m/s2)

⑥Frequency 45Hz and less than half of high load, no collision, maximum acceleration reading is -20g⑦Frequency 50Hz under high load, this situation can not be collided, high acceleration The measured value is ----20g

13:【Large Sine Wave Excitation Force (Thrust F)】 2000kgf (F= Weight*Acceleration)

F: 50kg*22g=1100kgf (same price as 100kg)

F: 100kg*20g=2000kgf (not included with this model)F: 150kg*15g=2250kgf (same price as 100kg

14: [Time Control] Any time can be set (in seconds)

Y axis/top and bottom - any time can be adjusted (in seconds)

x-axis/left-right- -can be set arbitrarily time (in seconds)

Z-axis/((the object rotates at 90°C) is the front and back of the Z-axis)--can be set at any time (in seconds)

①Execution time (in seconds): 0~65500 seconds (about 18 hours)

② Total execution time: number of cycles (adjustable to 65,500 times*18 hours=50,000 days) (about 135 years)

15 :【VersoSupply voltage under harsh conditions (V)】■ 220±20%/(50/60Hz)①Electronic dissipation device

② Install lightning protection device

③Main switch failure devices and high-order antiharmonic devices

16:【Current under severe conditions】15（A）

①Normal working current (0.5-6)A/bad collision current (6-10)A (prohibited for more than 10 minutes)② Install anti-leakage devices

③Misoperation/Collision/Overcurrent/Recovery device

④(second harmonic/surge) Stromgerät

17:【LQ-50XPTW Electromagnetic Vibration Test Stand | LQ-50XPTW laptop six-degree space all-in-one machine power】: 3.3KW (large)

①Control box: low temperature design / anti-high temperature design

②Body: high temperature resistant design Poor collision current (6 -10)A ( no longer than 10 minutes)

- النشرة الإخبارية High Frequency Sine Wave Vibration Table
- النشرة الإخبارية xenon lamp weather resistance test device box
- النشرة الإخبارية Height drop test machine
- النشرة الإخبارية UV testing machine
- النشرة الإخبارية Manufacturer of weather resistance test chambers for xenon lamps
- النشرة الإخبارية Thermal cycles and shock chambers at high and low temperatures
- النشرة الإخبارية High and low temperature test room
- النشرة الإخبارية Test chamber for xenon lamps
- النشرة الإخبارية Low temperature test chamber for bathrooms
- النشرة الإخبارية UV UV aging chamber
- النشرة الإخبارية UV test chamber
- النشرة الإخبارية Manufacturer of high and low temperature test chambers in Ningbo
- النشرة الإخبارية Test chamber for UV lamps
- النشرة الإخبارية Non-standard electromagnetic vibration test bench
- النشرة الإخبارية High and low temperature quick change test chamber uv light accelerated weathering chamber

Ozone Aging Chamber

Environmental Ozone Aging Test Chamber

Ozone Accelerated Aging Chamber

Uv light test equipment

UV Aging Environmental Test Chamber

You can Send Message or email info@qinsun-lab.com to us, we will reply tu you within 24 hours.*Now tell us your need,there will be more favorable prices!*

- Rain and waterproof test chamber in box shape
- Sino-Science ring trials how to distinguish high temperature test chamber and blast drying box
- النشرة الإخبارية 313 UV Lamp Irradiation Test Chamber
- النشرة الإخبارية UV test chamber
- Accelerated aging chamber under sunlight Xenon light irradiation
- Test chamber Fujian Programmable constant temperature test chamber
- النشرة الإخبارية Temperature shock test chamber that moves up and down
- Scope of application of the sulfur oxide corrosion test chamber and reference standards
- Sand and Dust Testing Machine
- Simulated UV aging test chamber

Home |
Product |
About |
Contact

Email: info@qinsun-lab.com

No. 2578 Gu Dai Road, Shanghai

Copyright © 2021.Qinsun Instruments Co., Ltd. All rights reserved.Sitemap