Which components of the seat belt tension machine can test the seat belt -qinsun

The seat belt tension test machine can use the QINSUN model HD-AB615-S computer servo dual-pillar tensile material tester, which can be used for stretching, bending, compression, glue intensity, tearing, puncture, enlightenment, enlightenment, enlightenment, enlightenment. Performance tests such as solution, pulling force.

The seat belt tension test machine tests the following components.

1. Destruction load of metal accessories: Including belt cards, safe hooks, semicircles, self-lock hooks, rings detection, you can refer to the standard GB/T 6096-2009 Security Network

2. Destruction load of webbing (belt): The test steps about the webbing here are the same.

3. Safety rope (suspended rope, safety rope) Destruction load: hold the safety rope on the pinch of the tension test machine, load it to 15kn at a certain speed, and keep it for 2min. If this operation cannot be completed, the product is unqualified

4. The overall static load test of the seat belt: the stretching force of 100mm / min at a stretching speed, fix the product on the test table; it will The loading point is adjusted to the front of the safety rope and the lace connection point; connect the regulator or bald loading device