1. Placement position: The constant temperature and humidity test box should be placed in a cool and ventilated place to avoid direct sunlight, stay away from the heat source, and leave the left and right sides of the top and back of the constant temperature and humidity test box when placing the back and back of the back and back. Proper space to facilitate heat dissipation. Because the high environmental temperature around the constant temperature and humidity test box will increase the power consumption of the test box.
2. After a period of time in the constant temperature and humidity test box, some frost will be produced. If you cannot frost, it will affect the cooling effect, and the power consumption will increase, and it will even easily damage the compressor. Therefore, when the thickness of the frost exceeds 7cm, frost should be performed.
3. Whenever you pull the box door, there will be air -conditioning exposure and heat invasion, so that the compressor must be left again. Therefore, when accessing the sample, try to minimize the number of door opening and door opening time. The opening and closing movements should be as fast as possible.
4. Pay attention to the constant temperature and humidity test box ldquo; take a bath rdquo;, the surface of the compressor and condenser should be cleaned every two to three months. The more dust, the worse the heat dissipation effect, The greater the power consumption, the power should be cut off when cleaning, and it can be cleaned with a wet cloth.
Mastering these tips can not only save points, but also extend the constant temperature and humidity test box as the service life. If you want to know more about the constant temperature and humidity test box, you can consult a QINSUN instrument, professional, professional Technical engineers answered you.