FAQ and exclusion method of dust test chamber, a comprehensive introduction

Dust test chamber Used to detect the outer casing sealing function of the product, mainly for two levels of IP5x and IP6x specified in the housing protection level standard. The equipment is more practical and easy to control based on the prerequisites of the national standard.

high quality equipment will also When a problem occurs. Understand the following problems and treatment, you will let you use it when you use it, you will take a look at and Xiaobian.

Dust test chamber
The turbine is not bright: detecting whether the supply battery is normal, detection phase prior Whether it is normal, is there a zero line.

Second, no dust: detecting whether the blower is normal or too small, detecting whether the dust is boring.
Third, no vibration: Detect whether the vibration motor is normal.

Dust test chamber
Watch the battery capacity, please distribute power according to the following method, do not The unit is used for a battery to prevent the pressure drop affecting the machine function, even causing a problem of malfilling. Please use it for loops.

1, the voltage is 3 pH; 4W380V / 50Hz;

[ 2, suitable for wire wires: less 4m in the cable;

3, the battery for test products, please do not follow Based on the machine, since the unit is planned, additional load may be added to the load is too heavy;
4, the device should be avoided Fees have malicious wiring and piping possible.