Function description of the thermal temperature impact test chamber

Function Description of Hot and Injection Test Chamber

Product function

Different temperature segment impact: The multi-stage evaporator structure is correspondingly cut, control the evaporation area and Refrigeration expansion valve matches, use the refrigeration system to reasonably reduce the output of the heaters and the output of the heater, reach constant energy saving; the independent ventilation valve, the action is introduced into the ambient air during exhaust (normal temperature recovery).

The air inlet sucks the outside air during the ambient temperature.

The exhaust port discharges hot gas timing predetermined functions from the mechanical chamber and the test area.

Pre-set test start time, the test chamber automatically starts starting and ready to start the test.

Exposure time is shortened.

The lower wind temperature of the test zone reaches the exposure temperature to the next exposure function.

Pre-processing / post processing function.

After the start of the cycle test, the sample was exposed to a high temperature environment (heat treatment) to maintain a certain period of time.

Dry operation function.

The test is running a certain time.

The cold heat temperature impact test chamber is divided into three boxes and two boxes according to the test requirements and test standards, and the difference is that the test mode and the internal structure are different. The three boxes are divided into a cooling chamber, a heat storage chamber and a laboratory, and the product is placed in the laboratory when testing. The two boxes are divided into high temperature and low temperature rooms, and the motor can be moved through the motor to achieve high and low temperature switching, the product is placed in the basket, and it is moving with the basket.